Electronics Forum | Thu Feb 11 10:59:09 EST 2010 | sumote
I am having some trouble finding an ESD safe wash basket liner. The trouble isn't finding someone who sells a product, the problem is all 3 products I have evaluated fail testing. All 3 were generators in excess of 2kv with 1 hitting over 4kv! This i
Electronics Forum | Fri Nov 21 15:34:16 EST 2008 | George
Does anyone know of an inexpensive way of holding small parts or boards in place in a wash basket to prevent them from moving during cleaning process.Keep in mind you want the top of the parts/boards to also get clean. Thanks
Electronics Forum | Fri Nov 21 16:43:30 EST 2008 | stepheniii
An expensive way is Stone Mountain Tool board cages. We tried to find a less expensive alternative but couldn't. These are the Cadillac of wash baskets.
Electronics Forum | Mon Nov 24 12:48:54 EST 2008 | swag
Steve, We build a lot of small flex circuits and we use conductive silicone mesh in our wash baskets to keep things from flying around. We buy it from AGI Corporation - Huntsville, AL - 256-858-3300.
Electronics Forum | Sat Nov 22 07:55:53 EST 2008 | davef
Search the fine SMTnet Archives. Here's an "old but a goodie" from Steve 'Zeva' Gregory: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=11862
Electronics Forum | Tue Nov 25 10:00:27 EST 2008 | wavemasterlarry
I use a alcohol rag and compressed air to blow out them via holes. I think washing is over rated. A simple wipe is all you need. Plus it keeps the planet green which is what everyone seems to be squacking about these days. Thats why I wash one a
Electronics Forum | Tue Apr 06 12:55:01 EDT 1999 | Patrick O'Connor
0603's and 0402's are being damaged by the water wash post reflow. PCA's are 1" X 4" and 2" X 2" approximately. We've adjusted water pressure so that the top-down is higher than the bottom up. The baskets have a .5" mesh spacing. Some baskets h
Electronics Forum | Tue Apr 06 16:22:58 EDT 1999 | Dave F
| 0603's and 0402's are being damaged by the water wash post reflow. PCA's are 1" X 4" and 2" X 2" approximately. | | We've adjusted water pressure so that the top-down is higher than the bottom up. | | The baskets have a .5" mesh spacing. Some
Electronics Forum | Fri Jul 24 17:02:37 EDT 2015 | cnotebaert
Id say get them panelized to help lock it down in a basket or under a screen, we actually started making our own baskets out of screen material, tight mesh and not as rough. the other option would be to get something to hold them off the wash conv ho
Electronics Forum | Thu Jun 15 19:01:32 EDT 2006 | Solder Iron
I have to hold parts down in my wash baskets. I heard there is a rubber mat with cut outs similar to the screen mesh that the wash basket has. This mat goes over the boards and keeps them from moving through the wash cycle. Has anyone seen this produ
winsouce.jpg)
