Electronics Forum | Thu Dec 10 05:58:59 EST 2009 | gregoryyork
Best to use Tin treated with TinP Additive. This ensures the Tin is fluid enough to Dissolve any Leaded residues. Run the machine for one hour at 275C then take out wave former and as much of the workings of the pot as possible. Then start bailing ou
Electronics Forum | Wed May 30 18:44:06 EDT 2007 | binow
Various processes throughout the factory will use a stamp to signify ICT has been completed or QA has been done. The problem we are having is once the boards have made it through all the steps and have the stamps on them signifying who did what; the
Electronics Forum | Thu May 31 13:39:23 EDT 2007 | wavemasterlarry
You need to switch to an alcohol based stamp. It will work cause that's what we use.
Electronics Forum | Thu May 31 08:18:18 EDT 2007 | davef
The following make inspection stamps. They may be able to help: * VRS Marking; 567 Camino Mercado Ste. A, Arroyo Grande, CA 93420; 800-782-6790 805-481-9787 F800-743-3135 F805-474-1238 contactvrs@vrsmarking.com vrsmarking.com * Des Moines Rubber Sta
Electronics Forum | Wed May 15 15:58:11 EDT 2013 | rgduval
Let me see if I understand you correctly. You have a batch washer (looks like a dishwasher). There is a top and bottom spray fixture, which would normally spray water up at the board and down at the board being washed. When you place boards in t
Electronics Forum | Tue Nov 14 18:55:16 EST 2023 | kghadiya
I relate to your problem. We face this issue sometimes. It's mostly flux from SMT, TH process or rework boards. To avoid foam in our Washer, we soak the boards in hot water for 10-15 min before running it through the washer. Or you can spray the boar
Electronics Forum | Mon Apr 04 22:25:44 EDT 2005 | mrduckmann2000
Help, Does anyone have a copy or know where we may purchase a copy of a manuel for an old Speedline Tooltronics II in-line wash. Speedline doesn't even claim to have ever purchased the tooltronics line...lol. We have a machine that we keep bandaidi
Electronics Forum | Fri Apr 03 08:22:36 EST 1998 | Scott Cook
| At this moment in time we are using water soluble solder paste on our PCBs these are cleaned using water only, agitated with ultrasonics. After drying a white/grey residue is left around solder joints. Reflow profile is fine and a reliable wash pro
Electronics Forum | Mon Jun 19 09:47:23 EDT 2017 | georgetruitt
You have a lot to think about! What does the flux manufacturer recommend as far as specifics like water temp or pressure? Do they recommend high temp di-water a detergent or saponifier? Do you currently have a cleaning machine, batch cleaner or inl
Electronics Forum | Fri Jul 24 17:02:37 EDT 2015 | cnotebaert
Id say get them panelized to help lock it down in a basket or under a screen, we actually started making our own baskets out of screen material, tight mesh and not as rough. the other option would be to get something to hold them off the wash conv ho
winsouce.jpg)