Electronics Forum | Fri Dec 16 11:21:18 EST 2005 | patrickbruneel
Steve, Water-soluble fluxes are per definition very corrosive and need to be cleaned (read the data sheet) Encapsulation will prevent humidity reaching the water-soluble acids but will not prevent reducing the metals the flux is in contact with to m
Electronics Forum | Fri Dec 16 10:25:37 EST 2005 | solderiron
Rather than cleaning a water soluble flux residue off the board, by encapsulating the product. covering the board or the component with lets say a Hysol encasulant. Would this prevent the active flux residue from migrating and deteriorating the elect
Electronics Forum | Tue Jan 02 14:12:23 EST 2001 | Dave Miller
I work for an R&D company that is starting to do some prototype and limited production circuit cards. We are deciding how we want to build these boards, and we are wondering what we should do about flux and cleaning. We have circuits that run at 15
Electronics Forum | Wed Jan 03 10:56:46 EST 2001 | Mike Konrad
Hi Dave, Water soluble flux has two opposite attributes. #1: It is the easiest flux to remove. #2: It is the worst flux to leave behind on a board. As for # 1, there are many de-fluxing systems out there that are very capable of removing water
Electronics Forum | Thu Jan 04 20:53:42 EST 2001 | Dave Miller
Mike -- Thanks for the information. It is very helpful. Is there any information available that shows what flux most companies are using? What fluxes are most companies that are producing Space, MIL-Spec, or other high-reliability assemblies usin
Electronics Forum | Thu Jan 04 21:03:25 EST 2001 | Dave Miller
Mike -- Thanks for the information. It is very helpful. Is there any information available that shows what flux most companies are using? What fluxes are most companies that are producing Space, MIL-Spec, or other high-reliability assemblies usin
Electronics Forum | Wed Oct 13 12:07:43 EDT 1999 | mikeh
Hi, I am currently using a peelable mask prior to wave soldering and have started exploring water soluble/washable masks. The mask will be used with water based and alcohol based flux. Are there any compatability issues to concider and how will this
Electronics Forum | Wed Sep 13 12:36:14 EDT 2000 | Steve Thomas
In the following thread, http://www.smtnet.com/electronicsforum/view_message.cfm?message=9584& John Thorup touched on some applications where no-clean fluxes could be a bad idea. I'm looking for some more detailed info. (papers, references, texts
Electronics Forum | Tue Oct 22 14:57:18 EDT 2002 | Jim M.
I use a water soluble flux to solder an LCD into gold plated through holes of a .031 circuit card. Problem is the current water soluble flux (850-33) is not made anymore (the drop in replacement has a different formuala and does not work). The main i
Electronics Forum | Fri Sep 15 09:24:54 EDT 2000 | C.K.
At my last place of employment, that was the big reason why nobody (especially the Design Engineers) bought into a no-clean process - interference with high-impedance circuits. One guy was so paranoid about flux residues remaining on the board, that
.gif)
