Electronics Forum | Sat Oct 29 21:24:30 EDT 2005 | Paul Standeven
The CSM84 family units are 3 headed pick & place machines with mechanical chuck centering technology. They use a beam pointer for fiducial correction. The CSM84V is the same as the CSM84 but has a downward looking fiducial camera onboard in lieu of
Electronics Forum | Thu Sep 28 15:57:49 EDT 2000 | Chris
Donna, Please email me at nolefthere@yahoo.com and I will give you my work #. I would like to talk to you on this subject. I have been placing 0402s with a Contact 3AV machine since Nov 96. I have too many suggestions and comments to tell you her
Electronics Forum | Mon Oct 26 20:09:19 EST 1998 | Dave F
| I'm very new to the SMT process but I'm tasked to qualify a MPM Printer and a Panasert PnP m/c. The product consists of 6-10 different parts of a total of around 70. Please advice on the parameters for each m/c which I should focus on for optmizati
Electronics Forum | Fri Dec 11 19:52:39 EST 2015 | dontfeedphils
I've dealt with MyData, Assembleon, Fuji, and Juki over the last 9 years with the majority being MyData and Juki so I'll talk about them. MyData was very nice for high mix/low volume due to the ease of setup and smart feeders, but I felt like I was
Electronics Forum | Sat Oct 10 11:24:50 EDT 2015 | cusackmusic
I've been running Quads for over 10 years, and I love them. I've had almost every model, from the 100, to our current IVCs, and QSP2. We are getting busier, and I'm thinking about upgrading. I have TONS of feeders, so the simple solution would be t
Electronics Forum | Tue Oct 27 15:25:02 EST 1998 | Stefan W.
Hi Samson ! In order to give you more detailed information I would like to know what your component range is and how many boards you supposed to do. Panasonic and MPM are a good choice, however, Panasonic has not many P&P machines on the U.S. market,
Electronics Forum | Tue Sep 15 14:44:01 EDT 1998 | Steve Schrader
| I am thinking of purchasing a Panasonic MV series chipshooter. If you own a Panasonic MV machine I would like to hear what you like and dislike about it. Is the service good? Are spare parts readily availiable? Does Panasonic support and follow up
Electronics Forum | Wed Mar 20 07:14:10 EDT 2013 | vinitverma
Assembleon AX201 is one of the most accurate odd-form placer. It can place anything, including leaded transformers, press-fit connectors, and of course odd form SMT components. You can even use a gripper nozzle for components without a flat surface t
Electronics Forum | Tue Mar 12 09:56:50 EDT 2013 | emeto
Hi, I don't know what you mean by really odd parts. Are they SMT parts that have a flat surface to pick them up? If so, probably several machines can do it. I know for sure Siemens can place almost anything. THey will help you with any type of nozzl
Electronics Forum | Tue Mar 12 10:16:05 EDT 2013 | bocci572
Yes the components are flat and no larger than 50mm in size. Most are full rings or just an arc of a ring. I understand fully the best way to have the capabilities proven would be to have the vendor demonstrate. I am kind of looking at what people
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774