Electronics Forum | Mon Aug 06 10:03:01 EDT 2007 | slthomas
I agree with jdengler on the rotary table being skewed. You need a couple of dowel pins (1 1/2" long x 1/4" dia., I think) to align that disk. Each idler is held on an eccentric cam and can be adjusted to square up the rotary table by dropping the do
Electronics Forum | Fri Aug 03 12:31:43 EDT 2007 | jdengler
You probably do not have "Drift". The rotary table and or fixture may not be square. The rotary table can be adjusted. You should have someone who has done this before available to make the adjustment before you try it yourself. You can check the
Electronics Forum | Mon Aug 13 14:11:14 EDT 2007 | jeffharley
Slot 11 in the I/O box is the one for B.E.C. pcb, the offset is 2125 in the x and 500 in the y axis. The template for the B.E.C. is triangle in shape and is the length from corner to corner on the rotary table. You can also type in sh sys and look to
Electronics Forum | Wed Feb 09 10:40:56 EST 2005 | primus
Another question about Set Command Variables. We use fixed dimension, multiple window PCBs in all of our UIC machines. It is often required that we use the rotary table to populate the entire panel, but this means that for each rotation, either the w
Electronics Forum | Tue May 31 11:50:22 EDT 2005 | Stefan
There is quite some difference with a fixed head versus a head mounted to a X/Y gantry. If the head can move, feeder tables and board are fixed. If the head is fixed, feeder tables and board have to move. Spinning a component around on a vacuum nozz
Electronics Forum | Wed Jan 23 22:30:46 EST 2002 | Jones
The CP-65E handles a wide range of board sizes, including large boards up to 508 x 457 mm or 20 x 18 inches. Handling consumer as well as industrial applications, this durable and highly efficient machine achieves a cycle time of 0.12 seconds/shot an
Electronics Forum | Mon Mar 25 09:26:16 EST 2002 | stefwitt
you should also look into the different placement methods and their advantages and weaknesses. A chip shooter with a rotary head and lets say 18 nozzles always places one component and picks one at the same time. PC board and feeder table move while
| 1 |
