Electronics Forum | Mon Oct 03 05:10:19 EDT 2016 | robl
Hi Nikhilesh, It was a long time ago, but we used to buy the nickel in reels then had a cut and feed station on the smt machine with selectable sizes. We did many types of boards in very large volumes, and usually the Nickel strip was soldered to t
Electronics Forum | Tue May 17 03:48:51 EDT 2005 | Base
YV100, easy... YV112 uses a dual work-area, dual gantry machine in which the gantry does X and the PCB-table does Y movements. Also each gantry can only work on one PCB work-area and can pick form only one side of the machine. Basically you have two
Electronics Forum | Thu Apr 14 03:52:23 EDT 2016 | steve Wu
Hi,this is Steve from Chinasky Laser Technology Co.,Ltd.focusing on laser marking machine and laser welding machine.I'd like to make a discussion on laser issues with you,when it necessary.My skype:stevewu11.
Electronics Forum | Wed Sep 29 08:44:57 EDT 2004 | davef
Nothing to say that you can't purchase thermocouple wire and spot weld it in the machine shop at your local high school.
Electronics Forum | Tue Jun 13 13:34:10 EDT 2006 | jsmith01
Does anyone have a Manual for a Hughes/Palomar Htt-1000 power supply and a VTA-96 weld head? I acquired these machines to do a small job that we need to attach a flex cable to a thermal print head. As far as I can tell this division of Hughes was s
Electronics Forum | Thu Oct 26 04:36:05 EDT 2006 | aj
All, We have a Ultrasonic Welder "Sonotronic 35/1200" manufacturer M.E.E. in Johanesburg. The machine was here when I started and we use it probably once or twice a year. Basicall welds a Plastic key housing together,. I have no manuals for this m
Electronics Forum | Fri Nov 20 17:50:51 EST 2009 | bigalnz
Hi All, I do PC/Laptop repair and are finding some jobs I cant do because they need a BGA rework. I dont admit to being a pro with respect to BGA, and thus a purchase decision is hard.I have been looking at : http://zhuomao.en.alibaba.com/product/
Electronics Forum | Fri Aug 12 05:24:35 EDT 2022 | ttheis
We recently parted out a GSM machine that we could not get operational. As parts came off of the machine it looked like the frame would make the world's strongest welding/work table. We stripped the frame bare and flipped it over instead of scrapping
Electronics Forum | Thu Aug 04 19:05:32 EDT 2022 | proceng1
I have been using this with good results. https://www.amazon.com/Portable-Machine-Welding-Equipment-Storage/dp/B092DB5R3S/ref=asc_df_B092DB5R3S/?tag=hyprod-20&linkCode=df0&hvadid=507714472492&hvpos=&hvnetw=g&hvrand=16970206287231
Electronics Forum | Fri Aug 14 07:52:03 EDT 2015 | mun4o
Hi all, 2 weeks ago we installing a new P&P machine - chip shooter.But , after installation proved that vibration of the new P&P arе very strong.If I use mashine to 100% of the speed the machine vibrating and after 2-3 panels moving 3-5 mm.The machin