Electronics Forum | Thu Apr 21 14:16:47 EDT 2005 | sumote
Wet/Dry/Vac is pretty standard. We mostly use Wet/Dry/Dry. Nice to see that I am not the only one still using the 288 machine.
Electronics Forum | Mon Apr 28 11:13:21 EDT 2008 | ck_the_flip
Here's a crude wettability test. Take a PCB - both types of finish - print them, and reflow with no components using your standard profile. Observe the wetting spread and flow of the solder paste. This rules in/out that it's PCB solderability.
Electronics Forum | Tue Sep 01 02:57:42 EDT 2009 | d0min0
davef As for the repair : - with hot air blower it is not possible (you can melt, but it will not wet) - with standard iron - no problem to repair (no additional material is needed) isd.jwendell yes, the profile is checked on those places (same si
Electronics Forum | Thu Jul 10 22:34:34 EDT 2008 | davef
We wouldn't get our underware in a knot about poor wetting on a lead that is not connected to the board. IPC standards seen to say that the inspector should use common sense in interpreting standards requirements. Then again, it's not all that common
Electronics Forum | Thu Jun 01 05:06:10 EDT 2006 | EC
Hi, I facing some 1005 component with poor wetting and look like not enough solder...... Is there any standard solder paste volume requirement. Appreciate all the input.
Electronics Forum | Fri Apr 16 15:25:01 EDT 2004 | ianlg
Hi Debi You might like to also include the R29-V which is a step up from both the Dek 248 and Microflex but at a similar price. 29" frame size ( multi-purpose adp available ) Bespoke software windows based, Incredibly easy to operate. Similar toolin
Electronics Forum | Thu Jun 25 16:13:05 EDT 1998 | Mike McMonagle
I am looking for a little enlightenment with an issue that we have been seeing. We have SMT assemblies with poor solderability on TSOP and mini-QFP type devices. The solder appears to have incomplete reflow and/or grainyness to the joints. Everything
Electronics Forum | Wed Jul 09 10:15:57 EDT 2008 | aj
I have carried out some further measurements on the device and the results are as follow: Component Lead width measures 183 microns. Actuals PAD width measures 158 microns. What I am thinking is that the lead is attracting the solder hence prevent
Electronics Forum | Sun Jun 14 03:02:14 EDT 2020 | kylehunter
We did a batch of boards with lead free HASL that we thought was leaded. Using standard leaded paste worked, but we did have some wetting issues. The issues were resolved when switching back to leaded HASL. Can't speak to your specific fiducial issu
Electronics Forum | Sat Aug 29 08:43:35 EDT 1998 | Dave F
| Hi, Friends, | Could you please recommend me some solder mask materials and equitements for high quality solder mask? Details such as company name, phone numer et al are welcomed. Thanks! | Have a good day | Xingsheng Xingsheng: Consider the follo
