Electronics Forum | Fri Jan 03 12:12:22 EST 2003 | richard
Good day and thanks for your comments Mike, What did I understood from your notes� 1) ROSE test (�extracting solution�) is probably good enough (with good equipment) to penetrate the space under my micro BGA. 2) I should test 2 parallel batches of
Electronics Forum | Thu Jan 02 11:35:30 EST 2003 | Richard
Cleanliness test � �Area Grid Arrays�. Evaluation of residues� resistivity in a specific location on the board. (As compared to �Solvent Extract� evaluation.) We are: SMT assembly, using standard �water soluble� process with micro BGAs (example: C
Electronics Forum | Thu Jan 12 10:05:13 EST 2006 | davef
There's a lots comparisons like this on the web. Here's one: Westwood Associates said on 8/12/2003: ||HASL||OSP||ENIG||Pd||Tin||Silver Flat||no||yes||yes||yes||yes||yes Solderjoint||Cu-Sn||Cu-Sn||Ni-Sn||Ni-Sn||Cu-Sn||Cu-Sn Contact||E-test, ICT||no|
Electronics Forum | Sat Nov 17 12:58:12 EST 2007 | mika
I agree with previous postings regarding print speed: Solder paste type/versus fine pitch. Question: Is this a double sided pcb with fairly easy component packages on both sides? In such case, consider make the panel like this: Every second pcb in
Electronics Forum | Thu Nov 02 17:15:48 EST 2006 | Mike Konrad
Asoe, The systems you are describing are Resistivity of Solvent Extract (ROSE) Testers. These systems are available using one of two technologies, Static or Dynamic. Both systems use a calibrated test solution comprised of IPA and DI water. The t
Electronics Forum | Wed Jan 22 10:35:38 EST 2014 | unisoft
_a class=roll > href="http://www.graphicode.com/GC-PowerPlace" > target="_blank"_http://www.graphicode.com/GC-Power > Place _/a_this does, I had a dabble and while it > does seem quite capable the learning curve is > quite steep and I'd wager th
Electronics Forum | Wed Feb 19 15:16:35 EST 2014 | jlawson
Gerber in general is not best data set for assembly, alot of processing has to be done, manually or via software tools, all with their nice features, but as you state there is no actual datum XY , pin 1 , rotation references thus has to be 'generated
Electronics Forum | Thu May 26 19:32:13 EDT 2005 | Mike Konrad
Three popular methods: Resistivity of Solvent Extract (ROSE) Test Method IPC-TM-650 2.3.25: The ROSE test method is used as a process control tool to detect the presence of bulk ionics. The IPC upper limit is set at 10.0 *g/NaCl/in2. This test is p
Electronics Forum | Fri May 10 10:56:10 EDT 2002 | itempea
Are you sure it's not ICT=in-circuit test?
Electronics Forum | Thu May 26 16:57:13 EDT 2005 | Sm Rookies
what test methods can be use to verify that the cleaning process for SMAs with water soluble paste is sufficient?
