Electronics Forum | Thu Sep 23 07:52:20 EDT 2021 | kojotssss
We use WRN (wide range nozzle) depend of head you use. H08, H02... Before pickup just make pickup offset and reduce pick up, transport speed. But, standard nozzle also could be used.
Electronics Forum | Thu May 29 14:57:26 EDT 2008 | rodrigo
Hi all, Is it normal for some of the small nozzles to be rejected by the wide view camera? Every time I do a nozzle centering the narrow view camera shows green circles for nozzles 1,2,3,4. The larger ones (5 and 6) show the asterisk. The wide view c
Electronics Forum | Tue Oct 21 05:28:37 EDT 2014 | rob
Hi Emanuel, Chingyi do quite a wide selection of rubber tipped nozzles http://www.chingyi.com.sg/solutions_smt.php If you are in Europe, then Wilfred @ Europe-SMT knows these machines better than most: http://www.europe-smt.com/ Our personal favo
Electronics Forum | Fri Dec 08 19:02:12 EST 2023 | madisreivik
Found the main problem During messing around (hopelessly :) we had found the calibration menu and pressed "check". Machine thought that there was a calibration nozzle (maybe 10x10mm square) but in reality, there was d=1.0mm nozzle. Machine decided
Electronics Forum | Tue Aug 01 11:09:44 EDT 2017 | mmjm_1099
Can you supply the following information to help with your question. 1. MFG P/N 2. Pick and Place machine being used 3. Type of nozzle and feeder being used on machine. We place a wide variety of LEDs and had similar issues and have to use custom
Electronics Forum | Fri Dec 08 17:31:17 EST 2023 | madisreivik
Changed camera, flicker is gone. But cannot calibrate nozzle centers with the narrow camera, error all time I checked buffer image, brightness and contrast is SAME as with wide camera. Center of camera is roughly aligned using nozzle, its better
Electronics Forum | Tue Aug 10 15:07:41 EDT 2004 | jbabson1
This could also be caused by a bad PD. What vision are you using for the Resistor Networks? I am assuming the you are talking about small flat packs about 3.3mm x 1.6mm? I use vision type 12 and just use the body size. (wide view). And 100% cam speed
Electronics Forum | Fri May 27 14:37:05 EDT 2005 | Frank
Look into the Juki KE-2060E machine. I have been extremely pleased with this machine. It will hold 80-8mm feeders, place 0201 (0603-metric) up to 74mm square ICs and BGA, 150mm long connectors. Up to 25mm tall components. It can handle up to 30 t
Electronics Forum | Mon Mar 03 12:25:37 EST 2008 | daxman
The problem was first noticed while doing a nozzle center. The wide angle camera would not display an image. After rebooting the machine (sometimes it took several tries) the camera would work. A few months later, the wide camera would not boot at a
Electronics Forum | Thu Nov 30 21:13:55 EST 2000 | Dave F
Can't find "WS601" on the Alpha site. What is that stuff? So, with nothing to go on, I'll just guess ... Yer probably cold welding the solder particles together. The nozzle size (inside diameter) determines the dot size. * With glue, small dot si
