Electronics Forum | Mon Nov 05 16:54:00 EST 2007 | bbarton
There are several things that can be done to increase throughput on you screen printer, including the panelization of your bords as Steve & Hussman has pointed out. However that's of limited use if you have plenty of stock that is not panelized. That
Electronics Forum | Sat Jun 25 00:52:31 EDT 2005 | ktron
Hi all, Recently I had problem with printing the lead free solder paste, almost every board has bridging especially on the fine pitch locations. Anyway this problem never happens when we use leaded solder paste. So I would like to ask if there are a
Electronics Forum | Tue Jun 28 13:04:08 EDT 2005 | slthomas
Are you saying that increasing the frequency of cleaning to every 3 boards *reduced* bridging, or that it's just something you tried? I don't understand why that would help(in my experience it has reduced "insufficient solder" conditions but not brid
Electronics Forum | Wed Jan 26 21:23:51 EST 2000 | Dennis
Hello! all Will anybody give me advice for missing componets for 0402, 0603 R or C chips? I am not gonna tell you which machine I use, but from my experience, every p&p machine has possibility for missing component after placing 400 or more componen
Electronics Forum | Thu Jan 23 20:57:33 EST 2003 | davef
If the flux was not activated (ran in another area of the board), the flux should be removed from the board. Any Comments? A: We agree. In order for its �benigness� to take effect, NC flux is affected by: * Type of flux * Amount of flux * Proper ac
Electronics Forum | Tue Jul 10 14:30:56 EDT 2001 | Claude Couture
We use Label& adhesive remover from M.G. Chemicals, cat. no.: 836-140g. It comes in spray can. Just spray and wipe.
Electronics Forum | Tue Sep 07 09:53:37 EDT 2004 | rob
Hi Dhanashekar, I'm with Chris on this one, unless you are carrying out 0201 or ultra fine pitch placement it's a helpful but not critical tool. We found most print errors were avoided using the 2D vision on the printer, combined with plenty of aut
Electronics Forum | Tue Jul 10 13:45:23 EDT 2001 | markhoch
We're stencil printing a Loctite 3614 Chipbonder adhesive, and we're using BioAct SC-10 presaturated wipes to clean the stencil after printing, without much luck. Operators are not able to remove all adhesive material left in the aperatures, and aft
Electronics Forum | Thu Jul 12 10:18:11 EDT 2001 | Hussman
Ummm...why not use Loctite 7360 Surface Mount Adhesive Cleaner? It's designed to remove adhesive and works great. Low oder and can be bought in 500ml cans for hand cleaning. Part# 25658. Use it why any dry wipe. Do not use alcohol to clean this
Electronics Forum | Wed Jul 11 20:24:00 EDT 2001 | davef
Well, your wipes are a good first step in removing the bulk of the material, but they do little or nothing to remove the material from the apertures. * It would probably be cheaper to use poly stencils and then throw them away after each use, eh? ;
