Electronics Forum | Tue Sep 10 10:42:36 EDT 2013 | capse
Plasma cleaning is used extensively to clean surfaces prior to wire bonding.
Electronics Forum | Mon Sep 09 18:10:35 EDT 2013 | davef
I don't know, but here is a link to a paper from the fine SMTnet Technical Library on a similar topic: http://www.smtnet.com/library/files/upload/Wire-Bonding-and-Soldering-on-Enepig.pdf Contact the authors and ask for their advice and help. BR, d
Electronics Forum | Mon Sep 09 15:38:02 EDT 2013 | arendonk
Hi, We are having issues aluminum wirebonding on ENEPIG plated PCB by a too low pull force and or having lifts (1% range). Could any body advice how to solve this problem? Is there a special wire bond grade required? How to best clean contaminant
Electronics Forum | Fri Mar 05 04:39:38 EST 1999 | Pan Tian Shun
I need advise on how can bonding of ICs to flex foil be done. The pitch of bonding is between 70 to 100 microns and the foil thickness is from 25 to 35 microns. Anyone, please enlighted what kind of bonding technology (thermo-sonic maybe), and curre
Electronics Forum | Sat Mar 06 08:45:16 EST 1999 | Dave F
| I need advise on how can bonding of ICs to flex foil be done. | The pitch of bonding is between 70 to 100 microns and the foil thickness is from 25 to 35 microns. | | Anyone, please enlighted what kind of bonding technology (thermo-sonic maybe), a
Electronics Forum | Fri Feb 12 05:53:32 EST 2010 | muarty
Hi Flipit, One of our customers has recently changed to this type of finish on their PCB's, due to them wire bonding MMIC devices in their factory after we do the SMT build. We found that we had to change all of our stencils for these products, as t
Electronics Forum | Tue Aug 21 05:05:52 EDT 2007 | vangogh
Hi All, I would like to get some inputs regarding this.... I have bare PCB which were stored with kapton tape attached on the Au plated pads. These were stored for close to a year. Upon removal of kapton tape, we noticed discolorations on the edges o
| 1 |
winsouce.jpg)
