Electronics Forum | Mon Jul 26 20:31:59 EDT 2010 | engr
When hand placing SMT components what is the working time before the solder paste become unusable (dry)?
Electronics Forum | Fri Jun 15 13:43:48 EDT 2007 | realchunks
I do want to run a profile, but they won't give > up the machine long enough for me to run one. > The boards that we are running through the wave > are large boards, with large caps, and large > transformers on it. We're building highend power
Electronics Forum | Fri Jun 15 12:37:53 EDT 2007 | ed_faranda
I do want to run a profile, but they won't give up the machine long enough for me to run one. The boards that we are running through the wave are large boards, with large caps, and large transformers on it. We're building highend power amps that
Electronics Forum | Tue Feb 19 10:09:48 EST 2002 | caldon
I always look at the support structure. This is where I feel the real Dollars and cents come into play. Sure you can calculate the derated value over months or years. But If your machine is in a "machine down" situation the derated value does not cha
Electronics Forum | Mon Aug 01 19:43:08 EDT 2022 | emeto
I would assume it can do under some conditions. If you manually go and define pick up positions for all parts, may be there is not a good distance between two parts to pick at the same time. There also might be ON/OFF menu for this option.
Electronics Forum | Thu Feb 05 02:43:22 EST 2015 | sarason
Hi.. Hommer, I am not able to install the Vision > tester software for ESV304 machine. It is giving > an error in the installation "Unable to load > HINST.dll" and software asks to re-install the > same again. I tried a lot. but all in vain. > P
Electronics Forum | Tue Aug 02 13:58:23 EDT 2022 | jojoled
Hi Thomas, Seems your machines do what I am looking for. Slight time delay between 2picks is OK,( because the software is not made in multithread way), that is OK.....I just want to have 1x definition of the component in placement data and Component
Electronics Forum | Thu Mar 26 11:29:31 EDT 2009 | cyber_wolf
I talked to Mydata service (briefly) 3 times. Halfway through the 3rd call it was suggested to me that we set up a service call. Times being what they are, we are not willing to go that route yet. Thankfully we are not in dire need of this machine ri
Electronics Forum | Thu Apr 09 13:38:41 EDT 2009 | thenrz
I'm working with a GSM machine and have a question - How do I go about using a local fid to act as a bad mark? Is that even the way to go about it? I have a stack of board here with one or more badmarks and it is a waste of time to keep modifying
Electronics Forum | Tue May 22 09:11:35 EDT 2007 | jola
Hi. We have changed our produktion from high volume to medium/low and have to start hunting change-over time. We have a lot of products with two sides and the settings of pins in the DEK 265 and Fuji QP242 machines when running b-side takes to long t
.png)
