Electronics Forum | Tue Jun 30 17:47:57 EDT 2020 | rsatmech
Manual method is always risky. Evening with all sorts of scanning people are loading it wrongly. Below are the recommendations I have. (Kindly comment if anything don't seems to be a solution) 1) peer to peer check - once loaded check the value usin
Electronics Forum | Thu Jun 25 12:05:34 EDT 2020 | spoiltforchoice
There is a fairly recent one. And all the conculsions need things you don't have. Buddy loading - so one person loading one verifying everything. Barcodes - gets rid of people misreading labels mixing up 4k7 with 47K or nbot seeing a decimal point o
Electronics Forum | Tue Jun 30 11:39:21 EDT 2020 | stephendo
The best I saw was two people set up and then two other people verify the set up. They still managed to wrong parts on. Day shift loaded the parts but did not have time for the independent check. Afternoon thought that the second check had been done
Electronics Forum | Tue Dec 21 12:28:11 EST 2021 | vtdivtecs
hey all, I had a comically bad failure yesterday while working with my pick and place, a part got dropped at exactly the wrong moment and flung a bracket up into the tool path, severely damaging the hydra controlboard that is next to the x camera. T
Electronics Forum | Wed May 02 09:25:09 EDT 2012 | tbouslog
Our company has recently changed the way our cage gives our SMT Department their parts to try to better control inventory. SMT now instead of recieving reels recieves strips with only 2-20 extra parts depending and the size/cost of the part. Does any
Electronics Forum | Wed May 09 17:49:16 EDT 2012 | dyoungquist
We run a Mydata high mix, low volume line. You can handle strips with either the Agilis feeders (losing the first 5-10 parts) or by placing the strip on the Y or tray wagons. For cheap parts like resistors, capacitors, some diodes and small ICs, ou
Electronics Forum | Wed Apr 04 20:22:35 EDT 2007 | diesel_1t
Totally agree on what you said, but there's some other things involved: There's not enough training, here in Juarez, Mexico, the level of pesonal turnover is very high so when you train on certain procedure, they leave for some reason and always is
Electronics Forum | Sat Mar 24 12:31:31 EDT 2007 | diesel_1t
Hi there. Ok, i have a little big question for fuji Erudites: when machine run out of parts on any device it tells to machine "parts out (and part number)" So, a signal from anywhere (maybe a PLC output) will tell to the machine "hey i'm out of parts
Electronics Forum | Tue Nov 04 06:50:48 EST 2014 | cunningham
What pick and place machine are you using? We use Mydata's with a software package for easy loading and traceabillity (Mylabel). We also have electrical verification checks on the first 3 picks of any feeder to ensure they are the correct parts.
Electronics Forum | Thu Oct 07 15:15:31 EDT 1999 | Charles Morris
| | Our first article inspection after machine placement can take several hours depending on the complexity of the board. The operator visually checks the board against the drawing and bill of material. I'd be interested to hear if there are any othe
