Electronics Forum | Thu Mar 04 16:40:06 EST 1999 | Dave F
| Hi, | | For hand placement you should see about 150-200 ppm of errors (solder, placement, values etc) on a board populated of types such as 1206, 0805, SOT, Tantalum etc. . As for solely wrong components (component at wrong location) you can usual
Electronics Forum | Fri Sep 09 05:42:43 EDT 2016 | jasltd
Hi folks, I'm looking for definitions on the categories from the Management reporting from MYData's (running My9 & MY19 machines TPSYS 2.4) I'd like to understand what the machine classifies into the following: Up time Active Time Run Time I"m buil
Electronics Forum | Tue Feb 18 16:13:04 EST 2020 | bk
Just by looking at your attachment and seeing that error, I would say that you didn't put in the magic word when you reloaded your software or mistyped it if you did. If you don't have your magic word you will need to contact mydata or whoever you bo
Electronics Forum | Wed Apr 07 09:43:55 EDT 2004 | Alan
We currently use the bartector system on our CP6. It has saved us quite a few times with wrong part numbers being loaded on the wrong location. (rework for certain parts would have been a nightmare) It is extremely easy to use. I was not involved
Electronics Forum | Tue Jul 18 15:47:07 EDT 2006 | Mark
IPC610 training to help verify issues that might arise. Also, the opeators need to know part numbers and descriptions because that should be common knowledge when running a SMT line. Plus, with your comment "At our company they know how the pick&plac
Electronics Forum | Thu Nov 14 18:06:05 EST 2019 | tey422
It doesn't really matter which PnP machine you use. The correct way to cut down the variety is to use the same mfg p/n part for the whole time. Some would try to cheap by increasing the part size tolerance, but that's not the right way to do it. To
Electronics Forum | Mon Apr 01 09:39:35 EST 2002 | stefwitt
Improving the control process may be not top priority of the machine vendors. In the mean time, investigate how the operators make these errors: Are the same part numbers on the reel, or do you have to use the BOM to translate the part number on the
Electronics Forum | Tue Mar 06 17:22:42 EST 2012 | acsscott
OK, did some more testing this afternoon. First, I moved the LED’s from feeder location #23 to Feeder location 30. This is three down from the other component(#33) it is picking, so it should be able to hit them both at the same time for two of the
Electronics Forum | Tue Mar 06 17:24:31 EST 2012 | acsscott
OK, did some more testing this afternoon. First, I moved the LED’s from feeder location #23 to Feeder location 30. This is three down from the other component(#33) it is picking, so it should be able to hit them both at the same time for two of the
Electronics Forum | Wed Jun 14 15:32:16 EDT 2006 | pms
We have recently started building assemblies containing 0402 components (argggg!!). Were using the TM8FC magazines and are seeing alot of miss-picks on the 0402 components. When the feeder advances the part, the part can; jump out of the tape, or tur
