Electronics Forum | Wed Jun 14 15:32:16 EDT 2006 | pms
We have recently started building assemblies containing 0402 components (argggg!!). Were using the TM8FC magazines and are seeing alot of miss-picks on the 0402 components. When the feeder advances the part, the part can; jump out of the tape, or tur
Electronics Forum | Thu Mar 04 12:44:01 EST 1999 | SMTASSY
Hi, For hand placement you should see about 150-200 ppm of errors (solder, placement, values etc) on a board populated of types such as 1206, 0805, SOT, Tantalum etc. . As for solely wrong components (component at wrong location) you can usualy redu
Electronics Forum | Tue Oct 27 20:41:07 EST 1998 | Scott McKee
| Does anyone have info on any of these systems (good or bad). We are looking at these 3 types for a new SMT pnp machine. We are low volume high mix. | | Thanks, Dave | I've worked with QuadIVc at Interstate... I then purchased a Mydata at this
Electronics Forum | Mon Oct 13 16:32:55 EDT 2014 | tombstonesmt
Designator>Part Number>Alternate. 2D labels are placed on all slots of the machine, operator scans slot, scans reel with unique material ID. Green light if it's good, red light if it's bad. Our software cannot lock out a machine if there is an incorr
Electronics Forum | Tue Oct 14 11:45:19 EDT 2014 | tombstonesmt
Scan Reel> THEN Verification system requires scan of reels directly to the right and left previously performed verification. Maybe even a timer to allow splice. It's difficult to achieve successful training when an operator is constantly told what t
Electronics Forum | Thu Jan 13 07:29:49 EST 2005 | Grant
Hi, It's both really, and we are doing higher volume of current products, but new products are increasing in component count, mostly passives. We have analog on our products, and this uses a lot of passives, plus each semiconductor needs decoupling
Electronics Forum | Wed Oct 15 07:14:42 EDT 2014 | alexeis
Hi, We have developed solution called Setup Center that helps you to verify online/offline verification. Please read about a solution on our website: http://www.proventustech.com/#!-setup-center-for-samsung/cjeg If you have any questions, you can
Electronics Forum | Thu Nov 13 06:27:06 EST 2014 | alexeis
Hi, As I heard, this system is a great tool but complex to implement and is not suitable for everyone, especially for small companies (and maybe some medium-sized companies). Small companies need a simple and locally without too much maintenance and
Electronics Forum | Wed Jul 17 18:00:37 EDT 2019 | rgduval
Generally, the machines can place the same types/sizes of components. The advantage with the 11 is that you can have more magazines loaded with more components, and build larger assemblies more efficiently. The -9, though, will get you through near
Electronics Forum | Fri Apr 15 08:23:14 EDT 2005 | cyber_wolf
We are seeing more and more jobs come in with matrix tray parts for our mydata machines. The problem is that the largest Y wagon will only hold 3 or less trays. We have some jobs that have 10+ trays. Currently our operators cut the trays down to sma