Electronics Forum | Mon Apr 29 17:19:34 EDT 2002 | Jimmy
The Agilis feeders perform as advertised after having them in use for several months. They significantly reduce the time it takes to load and unload feeders and don't require maintenance and calibration (unlike traditional feeders and the older Mydat
Electronics Forum | Mon Mar 06 11:13:08 EST 2006 | fredericksr
I ran this same process by MyData when I was there for training and I received the message that calibrating the force sensor through the service menu was an invalid technique. Correct me if I am wrong, but every tool should recalibrate itself when i
Electronics Forum | Tue Aug 17 12:05:27 EDT 2004 | rlackey
Hi Bernard, Sorry mate but it sounds like it's the Hard Drive ageing - we are seeing this more frequently on our older machines. Hope you've got the install disks & part library/program backups as they don't always like being ghosted. Hope I'm wro
Electronics Forum | Thu Nov 13 05:35:50 EST 2014 | jlawson
Valor-Mentor has bardcode based verification solution with machine connection and control for most machines on market and options to connect to machines in various ways to lock system until verification process is done. Handles splicing and led binin
Electronics Forum | Thu Nov 13 05:36:37 EST 2014 | jlawson
Valor-Mentor has bardcode based verification solution with machine connection and control for most machines on market and options to connect to machines in various ways to lock system until verification process is done. Handles splicing and led binin
Electronics Forum | Wed Sep 13 11:08:08 EDT 2017 | emeto
Here are the basics for theta issues in teaching: 1. CAD part library should match machine part library orientation. 2. If your placement orientation is correct and your feeding orientation(orientation in your feeder) is correct, there should be no
Electronics Forum | Wed May 04 19:09:52 EDT 2005 | russ
Can you not just check the part when it is on line and being loaded into the machine? You should only need to check this once. Verify your setup to the bom and not your assembled boards to the BOM. Correct setup and program = correct boards. More
Electronics Forum | Wed Jul 26 10:39:23 EDT 2017 | dontfeedphils
TL;DR: I like internal part numbering systems for passive chips and the like, and keeping MPNs for active components (or components with many variants and/or options that could be easily confused as equivalents). I've always been a fan of internal
Electronics Forum | Thu Apr 28 16:12:30 EDT 2005 | stepheniii
I was going to say something about being carefull to not replace part trays with full trays and to make sure where the pickup location curently is. I think we had a tray of parts drop, then there were restrictions on who could load trays. When I work
Electronics Forum | Fri Mar 03 07:03:57 EST 2006 | Mity-C
Good Morning All, We have a Mydata shop. 5 lines in all. We are also using a mix of old style and Agilis feeders. The claim that you will not loose parts in loading is based on keeping the clip with the reel. This is the whole basis of the Agilis co