Electronics Forum | Fri Jul 19 10:39:54 EDT 2013 | dontfeedphils
I believe it was rated around 20K CPH, and the F1 outpaced it most of the time, including review, rework, and re-inspection.
Electronics Forum | Thu Jul 18 18:32:18 EDT 2013 | rway
Hello all, I was wondering who out there has an F1 or F1-5 system used at post-paste. If so, what type of auto-insertion equipment are you using on that line and what is the cph placement capability. Does your F1 system keep up with the cycle time
Electronics Forum | Mon Aug 12 18:26:05 EDT 2002 | pjc
If you are talking actual placement rate- from first fiducial read of board no. 1 to first fiducial read of board no. 2, here is the best I've ever seen based on the boards I've run: CP3- 141 seconds for 468 components per board (all rectangular chi
Electronics Forum | Tue Aug 13 10:08:44 EDT 2002 | dougt
Tony, I'm in Ken's corner.....the speeds the manufacturers offer are pretty much meaningless when it comes down to your particular board. Brand X can say they will do 1,000,000 cph but when you put your board on the machine with multiple parts at di
Electronics Forum | Tue Jul 21 14:33:43 EDT 2015 | tsvetan
Setting aside the shameless advertisement :) Can you define what is high speed? The real high speed P&P machines are done by Sony, Juki, Samsung, Siemens, Fuji. The Chinese p&p machines I saw are with low speed (less 30 000 cph by ISO) poor design,
Electronics Forum | Wed Aug 26 04:31:20 EDT 2009 | prasadz
In XP142E very often we are exprencing the R Axis Servo error. When we reduce the Speed to 0.5 it becomes OK. Any body can give solution for this.
Electronics Forum | Fri Jan 14 02:49:30 EST 2005 | Grant
Hi, We don't have that to spare right now, but I was thinking about XP 142 and adding that to the current like, and then selling the MYDATA and getting an XP 242. Not sure about getting the CP model, as it's a serious bit of equpment, but would spee
Electronics Forum | Wed Mar 30 17:35:18 EST 2005 | Grant
Hi, Yes, it was fun reading this thread again. We initially upgraded our MY9 to a MY12 with line scan camera, but it was still too slow. We considered getting a second MYDATA, but decided to go with some FuJi XP 142, and 242 machines, with a second
Electronics Forum | Sat Feb 18 01:38:09 EST 2023 | sophyluo1985
Only the speed is updated, 90000CPH (95000CPH) is only the theoretical speed. The actual speed is 60%-70% of the theoretical speed. Is there any difference between other hardware and software parts?
Electronics Forum | Wed Sep 08 11:03:02 EDT 2004 | dj_jago
Peter, The Siemens placement equipment has a simple coding structure: HS50 - 50,000 CPH S20 - 20,000 CPH S23 - 23,000 CPH S27 - 27,000 CPH Well... you get the idea. I have no idea about the speed of the 'F' machines. We get around 70-80% of this
