Electronics Forum | Fri Jul 24 09:20:57 EDT 2009 | esolano
Any ideas, guys?
Electronics Forum | Thu Jul 23 09:59:11 EDT 2009 | esolano
Hi all, Zone 11 on a XPM2-1240 does not want to heat up and would not stay at set point. Does anyone have any ideas how to solve this problem? Or if you know of a technician in the Southern California area that can perhaps fix this problem, please
Electronics Forum | Thu Jul 23 10:02:19 EDT 2009 | esolano
I forgot to mention that we've tried to change the resistor on it.
Electronics Forum | Fri Jul 24 10:08:05 EDT 2009 | jdengler
Possibly, if you want to sell used equipment you should have a competent technical staff! Jerry
Electronics Forum | Mon Dec 14 12:59:36 EST 2015 | cbeneat
We have 5 XPM2's-XPM3I's, All 10 zone. Our oldest being 9+ years old and our newest being 8 months. All have been very reliable, PM maintenance is not complicated but can be time consuming. I have nothing to compare it to as my only experience is
Electronics Forum | Fri Jan 06 13:59:29 EST 2012 | cbeneat
I talked with Vitronics when I first stated seeing it, they were a bit perplexed too. The cooling fins get the same powdery buildup also, I actually see it from the cooling zones all the way to the filters. I'm actually not too concerned as it clea
Electronics Forum | Mon Mar 11 09:38:05 EDT 2013 | markhoch
Maybe I misinterpreted, because different people have different names for different devices, (i.e... I believe that the device that you refer to as your "surveyor", I refer to as a "profiler"), but did you already determine that your oven thermocoupl
Electronics Forum | Mon Oct 05 10:08:54 EDT 2015 | swiese242
I have a HVC 102 reflow oven that will randomly shut down for over/under heat. On the 601 overheat protection zone 4 will read over 500c. Has anyone had this problem?
Electronics Forum | Mon Sep 27 16:52:48 EDT 2021 | aex
During production the temperatures on the last 3 zones are approx. 20F higher than the setpoint. The other zones are operating within spec. We checked power, I/O, SSR's, thermocouples, and exhaust, but the issue remains. We did not check resista
Electronics Forum | Mon Jan 04 22:59:23 EST 1999 | Kris Ewen
I'd like to add something about the ECD product. During a past work term (I'm a a co-op student) in an SMA plant, I worked extensively with the Super MOLE Gold in developing the reflow profiles for high-mix, low-volume production. I was 'married' t
| 1 |
winsouce.jpg)
