Electronics Forum | Fri Feb 16 04:15:57 EST 2018 | sachinverma
hi , please check the main S/w. of the Reflow machine.
Electronics Forum | Fri Jan 12 09:22:51 EST 2018 | dskling
Hello We have a Vitronics XPM820 that has us stumped. We have replaced both power supplies (G1 and G2) and we still cannot clear this alarm. The A1 board has all 4 leds light for proper voltages. We have verified that we are getting the correct vo
Electronics Forum | Thu Oct 28 15:17:43 EDT 2004 | russ
I would look at Vitronics-Soltec such as the XPM 820 or even the 520. BTU also makes very nice ovens. The Hellers I used to use went through blowers every 6 mos. and both of them came it defective. You must have got lucky or I got unlucky. Russ
Electronics Forum | Fri Feb 03 16:55:20 EST 2017 | westshoredesign
We have 6 Vitronics Soltec ovens. 4 XPM 820's, an XPM 1240, and an XPM3. All of them are great, but we're very impressed with the XPM3, you can't go wrong.
Electronics Forum | Wed Feb 14 15:49:30 EST 2018 | cbart
Did you check each leg alone to ensure you have proper incoming voltage to the machine on each individual line? any other 3 phase issues in the building? do you have a UPS for pc and conveyor purposes? is that failing?
Electronics Forum | Tue Jul 22 16:51:14 EDT 2008 | maxpower097
OK I have read though all the treads and learned more. One more question if someone can answer it. Can I do this myself on site? We have a Vitronics Soltec XPM820 Reflow Oven. Or do I need a super special oven for component baking.. Thanks max
Electronics Forum | Fri Jan 12 11:46:26 EST 2018 | emeto
I don't know this exact oven, but usually it goes like that: First is a three phase power, then it is a contactor that is switching the power for the heaters and fans. than there are transformers for lower voltages. then there might be UPS system in
Electronics Forum | Tue Jul 22 20:47:21 EDT 2008 | davef
Q1. Can I do this myself on site? A1. Sure. Most companies demoisturate their components in-house. Q2. Can we use our Vitronics Soltec XPM820 Reflow Oven? A2. You can. Most of us would be using an oven like that in our product processing. If you look
| 1 |
.png)
