Electronics Forum | Wed Apr 13 12:34:49 EDT 2005 | vikkaraja
Hi there, this is my first ever post . please forgive me if it does not come out right. I randomly have problem with DSP shiffting in either x-axis or y-axis. It is enough that production has to reject the fully populated board. I have checked the fo
Electronics Forum | Thu Jun 09 09:08:09 EDT 2005 | russ
It's normal for us when we review design. We have found that in the Y axis we need .015" whereas in the X axis we can use .005" spacing. this relates to our nozzle size vs. pickup skew etc... This wouldn't apply if there are parts taller than XXX
Electronics Forum | Tue Oct 25 22:54:55 EDT 2005 | KEN
sorry. re-read your post. The problem is the home sensor relative to the home pulse. You're catching the wrong home pulse. a 10mm offset sounds about right for a 360 degree error. You need 50% +/- 15 % to ensure you always zero to the same phys
Electronics Forum | Wed Dec 21 06:47:16 EST 2005 | aj
not sure if I am understanding your question ... If the answer to your question is the following , I think you should book yourself onto a Programming Training Course right away! - the x and y co-ords for a matrix tray is usually determind from the
Electronics Forum | Sun Dec 26 01:47:43 EST 2010 | twentyninehairs
Do you still have the manual for this? I'm trying to convert one of these into a cnc router. It has a perfect frame for a strong table with a good plenum for vacuum ducting. I'll need to mount a Z-axis to it, probably beef up the y-axis, and re-arran
Electronics Forum | Tue Oct 16 12:34:40 EDT 2007 | actech
I have a V III that has a bad "Y" axis Bearing, it is different from the CSM 84 /V/VZ machines "It has dual bearing races on each side", Anybody have one for sale or a part number Philips list the machine as an "END OF LIFE" machine and support is li
Electronics Forum | Fri Apr 24 07:27:28 EDT 2009 | jdengler
Hi Nick, I took a feeder that was broken and modified it. I glued shims in place to set the sensor height with. I glued a block of metal to work as a stop for the Y axis. Then for the rotation I use a piece of paper to see were the emitter is poi
Electronics Forum | Wed Sep 02 06:15:39 EDT 2009 | bobpan
First thing to do is make sure the y-axis encoder scale is clean. Usually on these machines you can view the status of the read head or there is a led on the cable from the read head that will let you know if it is working correctly. Green means its
Electronics Forum | Fri Sep 24 16:01:07 EDT 2010 | dougt
I remember this problem but can't remember exactly what the reason was. It might have been the wrong pullup resistor on the MEI interface board used for the home photo on the y axis. You are right, after a couple hours the machine would work fine.
Electronics Forum | Tue Nov 08 07:23:03 EST 2011 | leemeyer
Thanks Bobpan, A function 6 tells me that I have firmware ver IVC 3.05. I keep getting a motor error 4 "The Xand/or Y axis did not reach the commanded position within 500 msec." The battery was dead on this machine so the mod codes were lost. I en
