Electronics Forum | Mon Jan 28 08:42:26 EST 2019 | bobpan
mod code 53. make it 2...this speed setting is closer to fast than slow.
Electronics Forum | Fri Feb 01 07:29:55 EST 2019 | dfl
oh! Please let me know if you find that info, it would be great to have a spare that can be plugged anywhere. You never know when some of these old cards will fail. Thanks bobpan!
Electronics Forum | Fri Feb 01 07:36:08 EST 2019 | dfl
done, mod code 53, "2" is faster than "1". Actually, it looks like the default "0" setting, but somehow it's working a lot better than the "0". Thanks bobpan, I believe this is the one!
Electronics Forum | Fri Feb 01 08:58:28 EST 2019 | bobpan
2 is a little slower than 0. leave me your email address and i will send you the procedure.
Electronics Forum | Fri Feb 01 09:02:06 EST 2019 | dfl
dfl1973gamer@gmail.com yes, "2" it's working good, thanks for the tip
Electronics Forum | Mon Jan 28 13:58:41 EST 2019 | oxygensmd
1. switch the axis cards 2. switch the axis servo cards 3. make sure the distance between scale and encoder is 400um 4. check the signal by oscilloscope, adjust to have the right signal 5. replace the scale or encoder
Electronics Forum | Wed Feb 06 06:14:01 EST 2019 | youngbuck
Try changing conversion board. 2 big ribbon cables plug in to it. p./n 00321189. or the 2 ribbon cables may need to be reseated. Thanks, Ryan
Electronics Forum | Wed Feb 06 07:02:31 EST 2019 | liquidspacie
We've found the problem. It was fault scale encoder. Swapping cards didn't help. Thanks everyone for the input.
Electronics Forum | Tue Jul 02 15:13:13 EDT 2019 | daniel_marquette
On our QSP-2, the Y axis belts start to vibrate during the process so we need to open the doors to stop this because of the humming sound. What can creates this knowing that all the movements and placement are spot on?
Electronics Forum | Thu Jan 06 09:31:45 EST 2022 | hello112
Does anyone have the part number of the Y-axis belt for this model DEK HORIZON 03IX press?