Electronics Forum | Thu Apr 29 04:34:08 EDT 2021 | liangshimoli
we need 85 pcs yamaha nozzle new orignal, urgent. please contact if you have. my email: luong.nhai6@gmail.com
Electronics Forum | Mon Jun 21 06:15:31 EDT 2021 | w550735819
I have a lot, please contact me sales08@feedersupplier.com
Electronics Forum | Mon Sep 11 08:22:56 EDT 2023 | richardcargill
A lot of MELF components have solder ends that stand slightly proud of the main body where your vacuum would lift them, so vacuum leaks are most likely the culprit. Upping the Vacuum to the nozzle may help, but better thing would be to modify the noz
Electronics Forum | Tue Sep 05 17:17:07 EDT 2023 | compit
1. What machine? 2. Check the ones that have fallen down for shape defects (badly adhere to the nozzle).
Electronics Forum | Tue Sep 05 20:06:08 EDT 2023 | emeto
Not sure what equipment you have, but it sounds like some vacuum buildup issue. You might have some leak, or blockage or vacuum buildup components malfunction.
Electronics Forum | Tue Sep 26 11:45:06 EDT 2023 | inostranec
Приветствую. У нас была проблема с таким компонентом, он оказался с прямоугольной серединой, именно по середине сопло захватывает компонент. Нужно подробное фото компонента.
Electronics Forum | Mon May 25 21:27:07 EDT 2009 | paligora
Our machine is YAMAHA YVL88II and the issues we have with these data switches are either not being picked up from the feeder at all or are being ped before assembly.
Electronics Forum | Wed Aug 21 21:00:59 EDT 2002 | chao liang
we will use melf nozzle , we want to know how to setting the part data (or other item in f4g ), so the machine (cp642) can identify it from the nomal 1.3nozzle . thanks
Electronics Forum | Thu Aug 22 20:34:19 EDT 2002 | chao liang
thank you , Mark thank you so much
Electronics Forum | Thu Aug 22 02:18:09 EDT 2002 | mjabure
Specify the nozzle size as 1.4 in both the nozzle allocation table and the PD, the nozzles will still pass center test as the size variation is still within tolerence.
winsouce.jpg)
