Electronics Forum | Tue Jun 19 13:49:08 EDT 2001 | Ben Brandt
Hello everyone. I'm trying to locate (if it exists) an impact sensor (which would activate if hit or jarred) on some sort of roll form with 2 leads which could be easily placed and soldered through automation. If anyone knows of a supplier, I would v
Electronics Forum | Thu Apr 30 05:22:40 EDT 2020 | bobpan
There is a sensor that monitors the temperature of the x and y1/y2 axis on the machine. You have a possible problem with the x temp sensor. There is also a temperature board that is located in the leg area below the keyboard. I am attaching a picture
Electronics Forum | Thu Sep 24 07:07:44 EDT 2015 | ermani9
Great News!! Happy to hear!! Yes. Location of these ports vary for different Models of control cards of machine.
Electronics Forum | Tue Oct 25 22:54:55 EDT 2005 | KEN
sorry. re-read your post. The problem is the home sensor relative to the home pulse. You're catching the wrong home pulse. a 10mm offset sounds about right for a 360 degree error. You need 50% +/- 15 % to ensure you always zero to the same phys
Electronics Forum | Wed Aug 22 14:39:02 EDT 2012 | wendynguyen234
Our S-2000 pick & place machine has head 2 not picking up any nozzle & displays error code 8342(nozzle check error). In ANC setting, head 1 pick/put ok but not head 2; when "MANUAL" box is checked, clicking PICK/PUT then both head 1 & 2's status disp
Electronics Forum | Wed Mar 21 09:05:53 EDT 2018 | stephenj37824
We are doing 2D on the printer. I got what seems to be a great price on the AIMEX III. I haven't heard back from Yamaha and Juki has emailed but no call yet. Fuji has a service person 3 hrs south of our location so it doesn't seem extremely far. I wi
Electronics Forum | Fri Dec 02 12:34:53 EST 2005 | Kokofiko
Hello, 1st of all thank you. 2. While I was reducing the rottor speed, I've noticed that the engine don't stop immidietly when I disconnect the voltage source. That makes me problem how to control what is the rottor location-How can I fix it up? 3. I
Electronics Forum | Tue Mar 15 15:10:57 EDT 2022 | kumarb
Hi. New to P-tools for Yamaha YV88X use. Just created the line1 -> machine1 details -> appear to be able to create fresh board data but doing so manually. Is it possible to import in VIOS text formatted CAD data into this tool ? That is, impo
Electronics Forum | Sat Mar 31 11:03:21 EDT 2007 | jmelson
I have a left to right conveyor, so the X offset is larger, but that is not major. You say "Make sure you are teaching with the unit that the machine defaults to or asks for." This is the beam sensor, and I have found no way to change this, either
Electronics Forum | Thu Jul 25 16:20:59 EDT 2019 | bobpan
Top red led is on or off depending on version of tep board. The green leds light when the transport sensor that it communitcates with is seeing a board over it. Tep controller init failure can be one of the following. 1. Check reseat tep card and
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
winsouce.jpg)
