Electronics Forum | Mon Nov 19 02:30:09 EST 2018 | robl
OK, so all GEM Machines & MG were built by Yamaha, and imported in to Europe & USA and other places by Philips. After a while Philips developed it's own machine - the FCM. Philips then sold off it's SMT division and it was rebranded Assembleon.
Electronics Forum | Thu Nov 29 15:52:53 EST 2007 | jmelson
Some other machines are a lot simpler. Here's how the Philips (mady by Yamaha) CSM84 works. Smaller tape (8 and 12 mm) feeders are all mechanical. A plunger on the head pushes a lever on the feeder at the same time the head comes down. First, the
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
Electronics Forum | Mon Jan 31 17:57:28 EST 2022 | compit
In my machines (Yamaha / Assembleon / Philips) there is an option to FIRST rotate the element and then check it with a camera (I do not use it, because it requires an additional better camera) - maybe you will find something like that at home?
Electronics Forum | Mon Oct 24 11:04:58 EDT 2022 | richardcargill
The yamaha feeders need leader tape to function - so if you're using cut reel components you'll lose 3 or 4 just on set up alone. Run-time attrition is harder to help with as machine setup and calibration, condition of nozzles/feeders, ability of ope
Electronics Forum | Thu Oct 04 00:01:59 EDT 2018 | gaintstar
Flason SMT FUJI Pick and Place Machine: http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-A10395-Fiber-Amplifier.html http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-Amplifier-A1038t.html http://www.flason-smt.co
Electronics Forum | Mon Oct 24 07:15:53 EDT 2022 | umar
Hi All SMT Expert and Members, Any one can help or share how to set the attrition formula at SMT machine pick and place process, FYI, I had a product with high mix low volume with qty running per model is less than 50 pcs, the pcb and place machi
Electronics Forum | Thu Jun 16 03:15:51 EDT 2022 | leaderway0
AI/SMT spare parts and SMT equipment vendors from China-Leaderway Industrial Co., Ltd. The main distribution brands are Fuji, Samsung, Juki, Yamaha, Universal, Panasonic, Siemens, and Sony. Our websites: http://www.leadersmt.com Contact us !!! Email
Electronics Forum | Tue Jun 07 00:21:42 EDT 2011 | jacki
Hi All Currently, we encountered that the schottky barrier diode was up side down or misalignment during SMT process.And, many parts were blown away as pick up error. What we found is its package space is a little bigger for parts to move. I seek y
Electronics Forum | Sat May 06 06:19:36 EDT 2017 | rob
You could also try some of the 3D MID placement machines - some have dispense heads in with the placement heads, so theoretically you could place on the PCB paste, dispense on the terminals. and place the new part. Yamaha/I-Pulse do a couple: https:
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
winsouce.jpg)