Electronics Forum | Mon Jun 29 20:49:12 EDT 2020 | compit
1) Thank you, I have instructions. 2) I don't have a phone number, I don't know English very well. I stopped looking - the element is too heavy and rotates on the nozzle during transfer.
Electronics Forum | Mon Oct 24 11:04:58 EDT 2022 | richardcargill
The yamaha feeders need leader tape to function - so if you're using cut reel components you'll lose 3 or 4 just on set up alone. Run-time attrition is harder to help with as machine setup and calibration, condition of nozzles/feeders, ability of ope
Electronics Forum | Sun Mar 24 16:53:44 EST 2002 | mikestringer
We place a similar square pin style of connector on one of our products. The connector is a 22mm high HW series from Samtek. We have a Yamaha YVL88 MK1 and YV88XS set up to handle them (Yes they are rebadged as Philips machines in some markets). No
Electronics Forum | Sun Feb 20 21:08:27 EST 2011 | Jacki
Is ur smt machine not able to pick 0402 componets? We use Yamaha SMT for 0603,0805,ect. We just change nozzle and feeder in the same machine when 0402 is needed to mount. by the way, we use not only new machine but 2nd hand also. there is a few sma
Electronics Forum | Sat Apr 28 21:13:11 EDT 2018 | stephenj37824
So lots of quotes and research later we have eliminated a few added a few to our choices lol. So it looks like we will be doing a decent volume now (due to our other board supplier letting us down as well). Roughly 4-5 million leds/connectors per mon
Electronics Forum | Thu Jun 16 03:35:46 EDT 2022 | leaderway0
AI/SMT spare parts and SMT equipment vendors from China-Leaderway Industrial Co., Ltd. The main distribution brands are Fuji, Samsung, Juki, Yamaha, Universal, Panasonic, Siemens, and Sony. Our websites: http://www.leadersmt.com Contact us !!! Email
Electronics Forum | Thu Aug 31 14:15:34 EDT 2023 | compit
Hello What feeder do you use for the long connector (65-80mm) - tape feeder, tray? What nozzles? We want to mount a SODIMM200 socket. I don't know whether to look on the tape or on the trays... The MG1 spec says it will mount connectors up to 100mm (
Electronics Forum | Fri Sep 01 11:55:27 EDT 2023 | tommy_magyar
In my previous job we fitted these connectors with bespoke gripper nozzles (ASM/Siplace) from bespoke trays made for these due to the high volume. It also reduces the risk of damaging the component further in case of a reject. However, at my current
Electronics Forum | Tue May 18 09:58:17 EDT 2021 | kumarb
Thank you so much for the advice. We were suspecting blockage but know that we have clean nozzles. Did the air blow out and removed a spot of black matter - perhaps what was an old o-ring? Nozzles are 61 and 62 posing the issue. Our tech said that 64
Electronics Forum | Sun Nov 12 17:35:40 EST 2000 | Darby
George, You need to calibrate your chucking assemblies! . What you are seeing is poor alignment due to egocentricity in you jawing assemblies. Also make sure that your jaws/nozzles are in good condition and that your assemblies are correctly orientat
