Electronics Forum | Tue May 07 20:29:55 EDT 2019 | airheart5959
Hi to all, Please help me where can I get any training manuals / operations manual of this Yamaha yg200 machine. I want to learn how to operate this machine and do troubleshooting. Your help will be appreciated. Thanks and regards, Airheart
Electronics Forum | Thu Mar 30 00:47:57 EDT 2017 | mrpackethead
I am trying to set up a YV100ii machine to pick up TQFP's from a manual tray. No matter what i do, it doe snot want to pick up the parts from the tray, but it keeps wanting to try to pick up parts from the place that a feeder would present the part.
Electronics Forum | Thu May 25 01:46:10 EDT 2023 | frankchan
Hi, I would recommend something from 21 Century at least. Considering it's mostly small batches there's no reason to raise the budget to purchase the Newest series. I think the principle here is something that'll do and do a nice job. If you are a Ya
Electronics Forum | Thu Oct 04 00:28:12 EDT 2018 | gaintstar
flason SMT yamaha pick and place machine: http://www.flason-smt.com/product/Yamaha-YG200-Pick-and-Place-Machine.html http://www.flason-smt.com/product/Yamaha-YG200-SMT-Nozzle-209-kv8-m71n9-a0.html http://www.flason-smt.com/product/Yamaha-YG300-311A-
Electronics Forum | Fri Sep 01 16:42:14 EDT 2023 | compit
I already see that most of these connectors are on trays - I just don't know if they are suitable for the machine. And I don't know what nozzles Yamaha/Assembleon/Philips use.
Electronics Forum | Mon Sep 04 10:15:41 EDT 2023 | tommy_magyar
As far as I can remember, these always arrived in flexible plastic trays. The trays we designed were made of Durastone. The parts were then transferred at a tape & reel facility from tray to tray every 1000x connectors. If these are high volume for
Electronics Forum | Thu Aug 31 14:15:34 EDT 2023 | compit
Hello What feeder do you use for the long connector (65-80mm) - tape feeder, tray? What nozzles? We want to mount a SODIMM200 socket. I don't know whether to look on the tape or on the trays... The MG1 spec says it will mount connectors up to 100mm (
Electronics Forum | Sun Feb 15 17:13:55 EST 2015 | spoiltforchoice
I don't quite understand how these two very different machines would end up on the same shortlist. They are very different machines with very different markets. A Europlacer IINEO is very very flexible platform designed for rapid changeovers and comp
Electronics Forum | Fri Sep 01 11:55:27 EDT 2023 | tommy_magyar
In my previous job we fitted these connectors with bespoke gripper nozzles (ASM/Siplace) from bespoke trays made for these due to the high volume. It also reduces the risk of damaging the component further in case of a reject. However, at my current
Electronics Forum | Sun Jun 17 09:37:41 EDT 2018 | sarason
The trick is to have the correct socket to place the IC into. Have the board permanently on the machine , place your IC run the attached programmer. pick up the IC and place back in the original or a new tray. Most SMT machines would be difficult to
winsouce.jpg)