Electronics Forum | Mon Sep 11 10:35:32 EDT 2006 | Gus Widmayer
Hi Dexter, Your problem may not be with the feeder itself but with the quality of the tape you are receiving. OX3 Corporation performs a peel test on every single line item that is processed through its facility. You may want to check with your cu
Electronics Forum | Thu Sep 14 08:09:39 EDT 2006 | dmfausti
Thanks for the reply. I will try to clean this feeders. They all seem to be worn out and needs cleaning and adjustments. Peel tester could be another way for us of making sure our system goes more efficiently. This peeling problem usually occurs on
Electronics Forum | Fri Sep 15 01:25:06 EDT 2006 | AR
Hope that cleaning helps. Mind you, the mechanical feeders are only rated for 4 million operations and some components need replacing after 2 million operations. You need to think carefully whether it is worth your while to try to resuscitate your ol
Electronics Forum | Thu Aug 22 05:05:12 EDT 2019 | worzel76
Hi I have a TVM920 pick and place machine but need something with a conveyor and more feeders I thinking of a used Yamaha YV100 XG or a Chinese SMT880 I want to make the correct choice and would really appreciate some advice
Electronics Forum | Thu Oct 22 21:20:41 EDT 2020 | compit
I have installed these https://pl.aliexpress.com/item/1586956574.html?spm=a2g0s.9042311.0.0.64075c0fte25Rn in Assembleon Topaz-X (Yamaha YV100X) and Emerald-X machines and they work fine.
Electronics Forum | Fri Jul 27 21:17:10 EDT 2001 | Mike Kennedy
We are looking at another pick&place machine for our production line and are leaning towards the Juki2000 series and the YamahaYV series machines. I would like any feedback from those in the industry who have used either of these machines. Also we cu
Electronics Forum | Tue May 17 03:48:51 EDT 2005 | Base
YV100, easy... YV112 uses a dual work-area, dual gantry machine in which the gantry does X and the PCB-table does Y movements. Also each gantry can only work on one PCB work-area and can pick form only one side of the machine. Basically you have two
Electronics Forum | Mon Sep 20 15:32:27 EDT 2010 | naveed
Yes!tahnkx I made a backup disc.the all data for production files,and also the data base library(vision files for component and fiducials) has been copied to the disc.we are in contact with yamaha consultant,they sent us the new manual which has the
Electronics Forum | Fri Apr 14 15:12:33 EDT 2017 | mrpackethead
> When the YV100 starts up if you press a key > > during its startup you can get it to ascreen > > where it asks for passwords.. > > > How would you > get the passwords from this > Hi, > > if you haven't changed them then I think > it's "spec
Electronics Forum | Fri Sep 30 09:03:55 EDT 2005 | davef
Pick and place: * Fuji: The largest pcb size is 20" by 18" for pick and place; 18"x14" for chip shooters. * MYDATA has machines that can be configured to 34" X 44" X 0.500" * Fuji has the NP XL series that will allow 27 by 23 inch boards using a con