Electronics Forum | Mon Aug 01 18:33:21 EDT 2005 | crishan
Hi All, We are not using a Vib. bowl feeder, or stick feeder, these parts are on a reel. The pick & place machine we are using is a Panasonic brand YV100X, its a single head with 8 nozzles. What we are finding is that the component package size is
Electronics Forum | Thu Jul 07 19:39:18 EDT 2005 | darby
This is a very difficult question to answer as it will depend greatly on your component mix. I will presume that the CSM 84VZ is of the following configuration: 2 x RDC Synchro Heads. Heads 1 & 2. These are mechanically centering heads with a chucki
Electronics Forum | Thu Jan 12 16:32:35 EST 2006 | Cmiller
The lightning head will place parts up to 30mm square but there is a height restriction and it will only pick from tape feeders, no trays, no vibes. It will put down QFP's at full speed and the placements are dead on. I think you need an optional p
Electronics Forum | Sun Sep 16 18:57:29 EDT 2018 | spoiltforchoice
Visit the machines, get your quotes. Establish what you need, make sure you understand the running costs of each, the availability of service personnel & parts - see who wins. The answer won't be the same for everyone. Also see which software you lik
Electronics Forum | Thu Feb 28 08:58:02 EST 2008 | adlsmt
We actually ran production boards on Mydata and Universal Advantis. The Mydata machines software was very command line oriented which I thought was strange but they said they had no intention of upgrading it. The Mydata placement accuracy was superb.
Electronics Forum | Fri Jun 22 00:05:15 EDT 2007 | sarason
Is anyone else using XON/XOFF handshaking, or is it best to >use CTS/RTS hardware handshaking? If you are using >XON/XOFF, what parity settings are you using? (Not unheard >of for the XON/XOFF chars to not obey the parity settings >for data chars.)
Electronics Forum | Fri Oct 02 07:26:50 EDT 1998 | smd
I didn't use my real name because I don't want to get bombed with phone calls and emails. We are an OEM looking to put in a SMT line soon. Is this GSM a decent machine? How much does it cost? | | Also and info on decent screen printers and reflo
Electronics Forum | Tue Nov 03 16:28:21 EST 1998 | Dave F
| Well my process is I'm running my belt speed at 3.50fpm and about 215 to 225 degrees top side. I got my main wave down to a little less than half the board thickness. I'm not using a hot air knife cause we thought it might create more of a problem
Electronics Forum | Tue Jul 10 11:36:22 EDT 2007 | dyoungquist
Hi SMT Frog We are using an upgraded Mydata TP9-1 system to place 0402s. We do an electrical test plus mechanical centering and use the C14 tool. A few things we have observed/learned: 1) Is the machine not picking the part up out of the tape? Po
Electronics Forum | Wed Jul 27 09:58:05 EDT 2011 | davef
Pressure printing systems Conventional stencil printing techniques have fundamental limitations as regards paste handling: The volume of paste available for printing is limited, so frequent replenishment is necessary Paste is difficult to c
