Electronics Forum | Thu Sep 19 21:46:01 EDT 2002 | scottefiske
In the past year I was responsible for developing and leading a Team focused on AOI, Evaluation, Justification, and with a full ROI required, supporting a HMLV manufacturing environment. If you have in these economic times the additional resources t
Electronics Forum | Thu Apr 19 18:03:56 EDT 2018 | spikesnpearls
hello i am a new aoi programmer and i was wondering how to choose/change what type of lighting it uses while scanning the board.i use a yestech ytv-fx
Electronics Forum | Tue Jun 13 23:16:32 EDT 2006 | mrduckmann2000
WE LOOKED INTO THE YESTECH AND THE MIRTECH. TODAY WE ARE INSTALLING OUR NEW MIRTECH AOI MACHINE. WE CHOSE THIS MACHINE OVER THE YESTECH BECAUSE OF IT'S OFFERINGS. THE YESTECH WAS A CLOSE SECOND. I WILL POST LATER ON THE PROGRAMMING, THEY ARE ALL
Electronics Forum | Wed Sep 06 09:11:12 EDT 2006 | kkovachy
Cmiller is correct are not going to find a better machine for the price. Also I have used several different AOI platforms and the Yestech is hands down the easiest to program. Keep in mind that changing platforms is expensive. Operators, programmer
Electronics Forum | Thu Aug 02 15:06:03 EDT 2018 | jeffallen662
They where bought directly from YesTech and were guaranteed to be programmed from YesTech.
Electronics Forum | Thu Nov 03 13:52:10 EDT 2011 | dontfeedphils
I'm going to suggest Mirtec. I've worked with many different manufacturers of AOI's (Cyberoptics, Mirtec, Omron, and Yestech) and if I could recommend one AOI for sure it would be the Cyberoptics above all. But when asking between the Yestech and
Electronics Forum | Thu Aug 02 09:14:17 EDT 2018 | jeffallen662
Hey I'm having some issues with a YesTech YTV-1000 AOI machine. The machine isn't recognizing the X and the Y stepper motors. As far as we can tell nothing mechanical is wrong with the AOI. They are new motors and were suppose to have been programmed
Electronics Forum | Thu May 26 18:55:15 EDT 2005 | bakersm
I have been comparing Mirtec to Yestech on a regular basis. As a AOI trainer and installer, I have seen significant difference between the machines. 1. In a side by side comparison just today, using the same board, I found the following: a. Insp
Electronics Forum | Wed Oct 31 12:06:08 EDT 2007 | devgru
We have the yestech systems and are very pleased with them. I would also suggest that you bring units into your facility to see a demonstration. It seems that there are really only two choices when it comes to the quick to program and easy to use ver
Electronics Forum | Thu May 26 16:08:30 EDT 2005 | HOSS
Has anyone compared Mirtech with Yestech? I've done a demo with both machines using our own board and data and found that the Yestech was easier and took less time to program but that's a pretty small sample. Any input appreciated.
winsouce.jpg)
.gif)