Electronics Forum | Mon Mar 18 07:55:59 EDT 2013 | stephendo
Talk to your buyers about forcasts. How do they know how to what to buy? They should be able to tell you what parts are going to be used on all the upcoming assemblies. Just make sure you don't get a purchase requirement report. That wouldn't inc
Electronics Forum | Thu Nov 15 19:56:18 EST 2012 | rgduval
I would have said it sounded like a motor/encoder problem...but, since you found the broken resistor, that was likely the source of your issue. The resistor and capacitor are a filter for the motor, MyData likes to put them on nearly all of the moto
Electronics Forum | Thu Dec 27 13:04:58 EST 2012 | dyoungquist
From the temps you list, I'm going to assume you are using leaded solder. What type of oven profile are you using: Ramp-Spike or Ramp-Soak-Spike? I think you will have better results if you use the Ramp-Soak-Spike type of oven profile. Better chan
Electronics Forum | Tue Mar 12 09:56:50 EDT 2013 | emeto
Hi, I don't know what you mean by really odd parts. Are they SMT parts that have a flat surface to pick them up? If so, probably several machines can do it. I know for sure Siemens can place almost anything. THey will help you with any type of nozzl
Electronics Forum | Wed Mar 20 13:18:26 EDT 2013 | kmots15
Is printing your concern or placement. I would say both: Printing: At 5 feet and on a flex you better have a really nice fixture to keep everything in check. You'll probably have to hand screen it unless your going to get a dedicated custom continu
Electronics Forum | Fri Apr 05 07:17:55 EDT 2013 | leemeyer
I've never seen one but i've been told that there is a 2 tier vib plate where the top plate is set back a bit so that the nozzle can pick from the top and bottom plate. OK so you have the plates on the machine and have entered their coordinates. Cl
Electronics Forum | Mon Apr 08 07:20:56 EDT 2013 | leemeyer
What operating system are you using ? I have found that you need to stay with a DOS based operating system. I am running DOS 6.2 with windows 3.11. I tried win 98 and although it seemed to run properly, I would have problems in the final program. XP
Electronics Forum | Tue Jun 18 09:51:53 EDT 2013 | rway
If they're 1 1/2 years old, they are definitely aged parts. Either send them back for newer or widen your tolerances on the ICT to compensate. You are at the 3rd decade now (10,000 hours) and you will need to compensate for this. These parts are n
Electronics Forum | Sat Jul 06 19:49:41 EDT 2013 | sarason
My software can easily open a PCB CSV file so this is probably the easiest way for you to generate a file. The setups are remembered via a write to the registry, so you can go with a standard set of values to arrive at a very usable file without havi
Electronics Forum | Thu Aug 01 16:28:17 EDT 2013 | jimmyboz
Does anyone have info on the "Cycle Steel" > function on the Fuji XP141 machines. I am new to > the industry and have not had any luck finding > information on it. I talked to Fuji and they > just tell me to leave it on, it will help with > pl
