Electronics Forum | Sun Dec 13 10:41:57 EST 2015 | alexeis
Hi, We have developed various solutions for SPC in view of SMT production. I can tell you that the solution depends on the need you are trying to solve. Our solutions are: ASD (AOI/SMT Diagnistics) - Real-time collecting, detecting and popping hidde
Electronics Forum | Mon Apr 25 06:34:29 EDT 2016 | spoiltforchoice
I'm going to ask the obvious question first. Why can't you place the entire job the same day you paste it? Getting a sensible workflow is a far better method of improving productivity than experimenting with crazy solutions. I can see a gas atmosphe
Electronics Forum | Thu May 05 19:13:33 EDT 2016 | darby
Thanks Sr. If you have zero tolerance for simul pick up in your component files then you will not have simul pick up due to variances in your head offsets. So you are saying that on your Juki you run a tolerance for 0201? All other head positions at
Electronics Forum | Mon Jul 25 09:45:39 EDT 2016 | spoiltforchoice
How do you answer that question? You probably won't find anyone who has worked with both which leaves them comparing datasheets just like you presumably already have. http://www.e-by-siplace.com/28657/E-Performance/Overview/e_series_stage.aspx?slide=
Electronics Forum | Sun Dec 11 22:55:22 EST 2016 | ppcbs
What type of flux is in your solder paste? Active or No-Clean? With lead free solder you really should be using an active flux. The lead free oxidizes during reflow if you are not using a Nitrogen or Vapor Phase reflow. So a more robust and activ
Electronics Forum | Thu Dec 29 09:03:03 EST 2016 | sumote
I would cut a piece of cardboard to the same dimensions as your circuit card. Run that through the fluxer of your machine and pull it out before the pre-heater. Take a look at the cardboard and verify that flux has been sprayed on it. That board look
Electronics Forum | Wed Apr 26 19:58:00 EDT 2017 | methos1979
Wondering how many out there have upgraded their AOI systems to 3D technology? For those that have here are some questions I have: 1.) What system were you using previously? 2.) What systems did you evaluate in your process of selecting a new syst
Electronics Forum | Wed Jul 12 16:21:26 EDT 2017 | bk
When i considered using one I bought a cheaper brand named aoyue which cost less then $140 U.S. just to see if it would work for what we were trying. It did work but our engineering dept wound up scrapping it and doing a redesign. I was going to get
Electronics Forum | Fri Aug 11 09:23:23 EDT 2017 | emeto
kalsi, it looks like you are more comfortable with Mirae. From reading your post, you guys set the Mirae faster and better than the Advatis, so I think the answer is clear. Many discussions here mentioned that the machines are as good as your unders
Electronics Forum | Wed Oct 18 09:32:05 EDT 2017 | alexeis
Hi, Pick and Place file is included in CAD file. CAD file contains full information about a board including internal layers, silk, PAD/Component structure, and more. You can use Pick and Place (PnP) file on preparing SMT Programs. In case of small
