Electronics Forum | Mon Feb 20 13:43:54 EST 2012 | acsscott
Having a problem at power up, that our Philips Topaz X displays "DOWNLOAD IO STN.DATA NG" in red. It times out after about 5 minutes, then comes up. When we try to find the origin, it gives an error that the "Head Down sensor is OFF". If we go int
Electronics Forum | Tue Feb 21 10:11:23 EST 2012 | vinitverma
The top level password allowed for customers is "specialist". All in small letters.
Electronics Forum | Tue Mar 06 22:47:16 EST 2012 | acsscott
Vinit, I email the files to you. Thanks, Scott
Electronics Forum | Wed Mar 07 09:16:20 EST 2012 | acsscott
ok, I'll give it a try and let you know.
Electronics Forum | Sat Sep 05 16:09:10 EDT 2015 | emanuel
Need assistance - I want to disconnect an unused LCS module from an Emerald machine. I disabled the tray changer and buffer conveyor in the machine's configuration but I still get an L212 error on the bottom of the screen and the machine hangs during
Electronics Forum | Tue Feb 21 10:45:45 EST 2012 | acsscott
Thanks for the password. There is a 7 pin connector for the Emergency stop in and out. It has a mate with a jumper wire attached to the Topaz end. If you put the jumpered mating connector on this, the emergency stop errors go away. The other conn
Electronics Forum | Mon Feb 20 19:52:31 EST 2012 | assybkr
Try "operator" or "administrator" if this doesn't work hopefully someone else can help you. Good luck.
Electronics Forum | Mon Feb 27 10:12:51 EST 2012 | acsscott
OK, Used specialist to enter the machine config at power up. We don't have a Tray Changer option listed.
Electronics Forum | Mon Mar 05 21:55:59 EST 2012 | vinitverma
Please describe the problem in a bit more detail like what is the size of the components in both the charges? It is possible that the size is a limitation here. What nozzles are used for all the 8 components in the component information?
Electronics Forum | Mon Mar 05 22:31:43 EST 2012 | acsscott
Using the 72A FNC nozzles to place 3216 resistors, and 74F nozzles to place PLCC6 LED's. The LED's ar 5mm x 6.5mm x 2.4mm tall.
