Electronics Forum | Tue Jun 26 09:17:18 EDT 2007 | swag
You might try inspecting the drive belts in the head for missing teeth or other damage.
Electronics Forum | Tue May 07 14:47:31 EDT 2013 | ngineer
Z axis seems to move as it should, the flag that goes through the C shaped sensor is not broken. I have gotten it to stay on everytime i start it up now (I did NOT change anything, just unplugged it for awhile, then plugged it back in an flipped the
Electronics Forum | Wed Jun 16 22:19:11 EDT 2021 | SMTA-64387687
Check the solenoids. They may not engage properly.
Electronics Forum | Tue Feb 10 14:45:06 EST 2004 | patthemack
I have an old De Haart printer that has a problem. It will not reset either the z axis or the squeegee. The z axis just gyrates, and I think it's trying to get to the zero position, which is all the way down, but it's already down. Is there a De Haar
Electronics Forum | Tue Jun 26 08:47:09 EDT 2007 | geb
Hi we have a Universal GSM 1 flex head machine. It keeps on bringing up an "Axis Head 1 Z velocity over speed error during move absolute command". Pushing the e-stop button and then start again will allow it to continue making the panel. It happens r
Electronics Forum | Fri Mar 30 06:59:00 EDT 2018 | bobpan
In Production Monitor....there is Utility and Axis speed. Make sure the z-axis are set to 100%. I would also check to make sure in your component information that you dont have your parts slowed down or have long place and/or pick delays. good luck
Electronics Forum | Mon Jul 05 11:16:50 EDT 2021 | aurash
Not sure if you fixed the problem in the meantime but try to disable the Z4 head to see if the problem actually belongs to the 4th head. Sometimes a totally unrelated problem is manifesting on the head. (I had communication problems between the XMP c
Electronics Forum | Sat Oct 21 17:41:05 EDT 2023 | basil_rv
Hi all! While operating the JUKI JX-350LED, error E600016 (Since the Z-axis is descending, it cannot operate) appeared. During initialization, this error appears, although all heads are raised. Rebooting and turning off the heads did not help. Wha
Electronics Forum | Sun Dec 04 02:20:20 EST 2011 | ngineer
I just got my hands on a Quad IVc, and am trying to find information on a Z-axis Error # 5 @ startup. I haven't really done anything since recieving the machine, I powered on, the Transport moves back and forth, the pc boots and I press enter to log