Electronics Forum | Fri May 14 15:25:51 EDT 2004 | bpan
Anyone out there have a good second source to purchase z-bellows (besides Tyco). Its worth a try!!!
Electronics Forum | Tue May 25 13:10:17 EDT 2004 | bbarr
I have purchased bellows from Garland. They seem every bit as good as original equipment at a lower price. I am going to try nozzles from them next. http://www.gscusa.net/ Bob
Electronics Forum | Fri May 14 16:07:44 EDT 2004 | gregp
Here's a couple for starters...don't know quality or pricing. http://www.cotinc.com/Pages/Quad.htm http://www.goppm.com There are others who make replacement nozzles as well as other spare parts.
Electronics Forum | Wed Sep 04 13:32:22 EDT 2019 | bobpan
Try these things: 1. Do a function 30....your nozzle height should consistently be around 200 +/-20....but whatever number it does find it shouldn't change. (with nozzle on) 2. Most times its the z-bellows....an old z bellows that has a worn out spri
Electronics Forum | Wed Dec 20 10:44:31 EST 2017 | bobpan
The z-rod bellows on head 2 and head 3 are slightly bent. The machine will show you this error if the runout is over 6.5 mils. This is usually caused by too much z when picking parts out of a vib or tray feeder. The machine will probably run. I ha
Electronics Forum | Thu Aug 25 08:22:41 EDT 2016 | bobpan
If I have to guess then I would say the machine is first picking up a larger nozzle to pick up this part.....the nozzle is not seating on the z-rod correctly and causing a problem. Check to make sure the nozzle is being mounted correctly. You may als
Electronics Forum | Thu Nov 20 08:10:35 EST 2008 | wanderson
Hi All, Can someone find out for me the cost of a spare part for the Contact3Z platform in the USA for me please? The part no is 3Z-M06-01-14. It is the bellows that fits onto the end of the tool spindles. In the UK we are being quoted a redicul
Electronics Forum | Wed Sep 20 06:01:20 EDT 2006 | bobpan
Sounds to me like your nozzle isnt seating on the z-rod bellows. Pick a nozzle up by do a 'runstep nozzle'.....then do a function 30 ( i hope thats the function because its been YEARS since i worked on a c'series). It should give you a nozzle height
Electronics Forum | Mon Aug 20 05:45:18 EDT 2012 | bobpan
To solve your problem....you should do the following: 1. Super Lube the o-rings on the z-rod bellows. 2. Make sure your head to camera calibration and head to head calibration is good. 3. Line up the nozzle changer pocket positions. 4. Make sure you
Electronics Forum | Wed Dec 23 20:06:26 EST 2020 | marcelorotofrance
Hi, I'm using a "ye olde" Quad 4c Mk2 built in 1995 for eight years. During that period I had to change 3 HDD (now it runs a compact flash with and free DOS), 3 Z-rod bellows,3 laser heads, some monitors, nozzles and misc parts. Despite that it has t
