Electronics Forum | Wed Sep 26 12:16:44 EDT 2012 | bwjm
Hi Guys,recently i am facing an issue. Refer to the attached photo. This PCB is high RF speed, gold immersion single layer. After reflow, my solder seems to have black stains on it. I tried with SAC305 paste water soluble and no-clean, both results a
Electronics Forum | Fri Apr 04 18:16:43 EDT 2014 | garym4569
We are in the process of launching a new product and found reflow solder issue with one of the inductors. I have set oven profile to paste specifications. I just finished profiling with thermocouple under problem component. All other components ex
Electronics Forum | Thu Jan 19 16:38:39 EST 2012 | dyoungquist
We are not using SN100C in our reflow process but I know the type of flux made a big difference with our SAC305 solder. We started out using no-clean flux in our SAC305 paste and were having some issues. We then switched over to a water soluble flu
Electronics Forum | Mon Jun 20 21:54:38 EDT 2005 | darby
Contact your paste supplier and see what they say. My information on SAC 305 FROM MY SUPPLIER was - "The cool down rate is not as critical for Pb-free solder joints, as it was for SnPb. The grain sizes do not differ is size in the Pb-free bulk solde
Electronics Forum | Wed Jul 27 17:18:07 EDT 2005 | Carl
Any issues in your experience using SAC305 for reflow and SN100C for wave on ENIG pcbs? I've seen the CD, but there's not much specific data regarding ENIG pcbs Thanks
Electronics Forum | Wed Apr 04 03:07:16 EDT 2007 | pavel_murtishev
Good morning, Problem definition Poor soldering of thermistors with Ag/Pd termination Background Process: lead free reflow soldering Paste type: Multicore LF300, SAC305 Component type: 0805 chip thermistor, Ag/Pd termination PWB finish: immersion A
Electronics Forum | Thu Jun 28 09:54:06 EDT 2012 | mosborne1
Dave, They rework fine. All solder joints on the whole board look great especially for lead free sac305. Here are the reflow specs: SAC305 no clean solder paste – Kester EM907 Kic thermal profiling device – 50%process window green light profile. • M
Electronics Forum | Sat Sep 12 14:10:38 EDT 2009 | GSx
First, make sure that 63/37 BGA can withstand higher reflow temperature of of lead free SAC305 GSx
Electronics Forum | Sat Sep 12 10:12:20 EDT 2009 | tylaburg
My customer wants an SnPb 63/37 BGA soldered using SAC305 solder paste. What data is avaiable showing the long term reliability of the intermetallics of the solder joints?
Electronics Forum | Thu Jun 28 15:38:37 EDT 2012 | davef
Matthew: That you can get solder flow when hand soldering, but not when reflow soldering, seems to be telling you that you're not getting the connection warm enough during reflow. You need to have those connections liquidous + 20*C for at least 5 sec
