Electronics Forum | Thu Mar 02 23:09:20 EST 2006 | kmp
If you have a servo or encoder problem you should be getting alot of errors. Are all feet leveled on a stable floor? It wouldn't take much to shake them. A full coke machine weighs more.
Electronics Forum | Sat Mar 04 11:07:21 EST 2006 | charls
hi pavel, If you are getting vibrate during fast mode, encoder or motor cable might be faulty. yes i faced the same problem in Juki KE2010 m/c. Try by replacing encoder & motor cable from Motor to driver unit. All the best
Electronics Forum | Thu Mar 02 05:07:51 EST 2006 | pavel
We have bought an old zevatech 730 in Bosch auction (hello MikeZIG). There seems to be something wrong with the X axis servo, the machine is vibrating when the head is moving fast (in fact the machine is dancing, in the race with washing machine it w
Electronics Forum | Wed Mar 08 08:37:24 EST 2006 | wbartley
Pavel First off I agree with Newton It sounds like the machine may not be level. Check all four feet while the machine is warming up none of them should be moving up or down. Chances are your right front or left rear foot is not at the right height.
Electronics Forum | Thu Mar 30 08:20:02 EDT 2023 | hub
Hello, I'm looking for english instruction manual for zevatech pm570. I can't find it on web, and it comes with a german manual...
Electronics Forum | Mon Apr 17 13:43:53 EDT 2023 | sarason
My contact that had a KP620 , just emailed me that he had sold it a few years back. And now has no manuals. You could also check out if the old Yahoo Zevatech group is still going on Google groups. sarason
Electronics Forum | Fri Apr 07 22:20:59 EDT 2023 | sarason
There was a group on Yahoo http://www.ca.groups.yahoo.com/group/zevatech/ You could try the wayback machine? sarason
Electronics Forum | Tue Apr 11 09:02:24 EDT 2023 | hub
Thanks sarason for your answer, But I didn't find any relevant information : With wayback machine I find just a page that saying how to join the group, but nothing more... seems to be "member only access" Anyway, I've tried to send email to join a
Electronics Forum | Mon Jul 11 21:46:19 EDT 2011 | garym4569
Anyone know how to enable pick tracking for the Juki 730 and 760. Our Juki 750's and 2060 allow me to press the camera button during a production stop to manually check pick position with the camera if the machine stops for no component, laser recon
Electronics Forum | Fri Jul 29 18:00:31 EDT 2011 | daveatdt
There should be a "Tracking" button at the bottom of the screen that you can just tab over to, then press the green start button. I have not worked with the 730, but it is that way on our 740, 750, and 760 machines. Alternatively, you can move the cu
winsouce.jpg)
.gif)
