Electronics Forum | Sat Mar 04 11:07:21 EST 2006 | charls
hi pavel, If you are getting vibrate during fast mode, encoder or motor cable might be faulty. yes i faced the same problem in Juki KE2010 m/c. Try by replacing encoder & motor cable from Motor to driver unit. All the best
Electronics Forum | Wed Mar 08 08:37:24 EST 2006 | wbartley
Pavel First off I agree with Newton It sounds like the machine may not be level. Check all four feet while the machine is warming up none of them should be moving up or down. Chances are your right front or left rear foot is not at the right height.
Electronics Forum | Thu Mar 02 05:07:51 EST 2006 | pavel
We have bought an old zevatech 730 in Bosch auction (hello MikeZIG). There seems to be something wrong with the X axis servo, the machine is vibrating when the head is moving fast (in fact the machine is dancing, in the race with washing machine it w
Electronics Forum | Thu Mar 30 08:04:56 EDT 2023 | hub
Hello, I'm looking for zevatech (juki) 570 owner that could help me to resolve my problem. I had the following error that occure just before (or sometime a few after) homing the machine : "E7018:Driver Error KNOCK position error ". Previsously I had
Electronics Forum | Tue Feb 10 06:29:45 EST 2015 | sarason
Ask the question in the Yahoo Zevatech group, It has many experienced Zevatech/Juki Users. https://ca.groups.yahoo.com/neo/groups/zevatech/info My program PCBSynergy will program this machine. pcbsynergy.com regards Sarason
Electronics Forum | Sat Nov 09 22:05:17 EST 2013 | sarason
Try the Zevatech group on Yahoo http://ca.groups.yahoo.com/group/zevatech sarason
Electronics Forum | Thu Jul 26 22:15:57 EDT 2001 | davef
Every time you see one of those �National Geographic� articles showing pictures of clothing sweatshops in developing countries, the girls are sitting at gray Juki sewing machines. Juki placement machines were branded and distributed in the Americas
Electronics Forum | Tue Jan 13 23:04:54 EST 2004 | Frank
Bob, Zevatech machines were simply relabeled Juki machines. Have you tried to contact your local Juki Service Office? Frank
Electronics Forum | Sun Jun 06 02:47:33 EDT 2004 | ravi
hello friend, if you have any problem, Zevatech m/c is handling by JUKI -Japan. You contact to juki, They will help you in deep.
Electronics Forum | Thu Feb 05 08:39:35 EST 2004 | pjc
Dave is correct in that the Zevatech is actually a Juki. Made by the Japanese Juki and labeled by the Swiss Zevatech. The PM 575 is somewhat vintage. I believe it may be all mechanical component centering. It may be OK for the 20mil fine pitch but ma
.gif)
