Electronics Forum | Tue Jul 18 20:17:25 EDT 2000 | Dave F
Bluto: Either: * Give the springs in your probes some spinach ... OR * Print some paste onto your test pads Popeye
Electronics Forum | Sat Nov 13 03:10:36 EST 2021 | pti88
why poor contact between PCBA board and probe？ When I used ICT to test PCBA board, there was poor contact between board and probe .
Electronics Forum | Thu Sep 21 10:34:20 EDT 2006 | Kerwin Hooshey
Is there an ICT probe style that can pierce through tented (closed) via's?
Electronics Forum | Tue Sep 08 06:31:16 EDT 2009 | bandjwet
Does anyone have any experience with cleaning debris, removing oxidation from ICT (or for that matter flying probe)probes: Regards BWET
Electronics Forum | Fri Apr 27 10:55:54 EDT 2007 | Brett
Pete, is there a probe-style that will accomodate a via that's filled, but a little concave (inward) fillet? The ICT personnel complains about this scenario too. I'm not an ICT person, but I do know that there are pogo pins that have a crown (for t
Electronics Forum | Sat Jul 29 13:30:17 EDT 2006 | Chunks
Some have a bottom side adaptor plates with pins to make contact to certain areas of your board. The top side may have one or multiple heads that can move the entire area of your board. On each of these haeds is a pin like that from an ICT machine.
Electronics Forum | Wed Oct 02 15:08:37 EDT 2002 | Eric
See Fiske first line. I'd bet You are bending or catching the assembly in the ICT. How many probes at 8OZ each? do you use on that ICT? 800 probes = 400lbs. See "Flexure induced failure of BGA solder joints" by Compaq Houston TX
Electronics Forum | Fri Apr 27 10:38:30 EDT 2007 | pjc
No dome needed. You should check what type probe you have. You can look here and consult with them: http://www.qualmaxamerica.com/qualmax/leeno/semi.asp?string=ICT
Electronics Forum | Wed Nov 29 11:56:10 EST 2006 | CK the Flip
For the better part of my career, I've battled with ICT guys on so-called "flux residues" on their test probes, and this was when using NO-CLEAN, 2% to 5% solids tops, flux. People don't understand that ICT probe maintenance is an inherent part of
Electronics Forum | Thu Mar 23 20:31:45 EST 2000 | davef
Hey Cartman: Recently, I was over at a plant that does ICT on RMA fluxed boards and asked them about flux residue on test probes. The test machine operators: * Think flux residues are a pain in the gluteus maximus. * Change probes (from a collectio
I.C.T is a manufacturer from China that offers SMT, DIP, PCBA conformal coating equipment and turnkey solution.
I.C.T Industrial Park, Building 1
Dongguan, 30 China
Phone: +86 13670124230
.png)
