Electronics Forum | Mon Feb 20 13:02:22 EST 2017 | ttheis
We tried both of these suggestions and the 3-1953 is less viscous than the 3-1944 so it will flow better on the board for our conformal coating application. What cleaning solvent is recommended for cleaning off the auger parts, etc.? I haven't been
Electronics Forum | Fri Dec 07 15:17:06 EST 2001 | davef
Dull / shiny, I�m not sure that�s a proper indicator. If �Liquid Tin� adds a thin coat of solderable material without converting the corrosion on the surface of the lead, the corrosion will [probably] continue to increase and potentially affecting t
Electronics Forum | Thu Jun 10 21:09:17 EDT 1999 | Samuel F.
Humiseal probably won't work as most of them are solvent based or require pretty high temp cures. MicroCoat technologies manufacturers UV cure epoxy conformal coating materials that have been used to coat just about anythin (except the green fog) Cal
Electronics Forum | Tue Nov 07 11:51:06 EST 2000 | SPD
Hello John, Some determining criteria. 1. Examine what you are cleaning. Pastes, epoxies, inks, etc. Get the MSDS and samples ready and be prepared to forward them to the manufacturers for testing. They can respond with appropriate system and c
Electronics Forum | Wed May 26 10:00:03 EDT 1999 | David Scott
| | | | | | | | | | | | Any suggestions on how to maintain Adhesive dispensing nozzles??? They seem to plug up over night and it is starting to get on my nerves. We have tried leaving the nozzles in the machine, removing them and soaking in alcoh
| 1 |
.gif)
winsouce.jpg)