ASCEN Technology | https://www.ascen.ltd/optical_inspection/1073.html
tin.after the tin slag is filtered by the solder dross separation device process,the reusable alloy settles in the lower section of the pot while the dross floats on the
ASCEN Technology | https://www.ascen.ltd/optical_inspection/1074.html
tin.after the tin slag is filtered by the solder dross separation device process,the reusable alloy settles in the lower section of the pot while the dross floats on the
| https://www.eptac.com/soldertips/dealing-with-the-problems-of-soldering-iron-tips-breaking-down/
quite higher than the melting temperature of the good old 63/37 or 60/40 tin/lead alloy solder. We were wrong. Increasing the solder iron temperature did not help, in fact, it created more problems and tip usage went through the roof
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/select/about/news/custom-interconnect-limited-installs-latest-nordson-select-novo-460pd-selective-soldering-system
, “As well as SAC305 RoHS alloy products, we have a number of military customers who still require tin-lead soldering. We can utilize the dual pot system of the Novo™
| http://etasmt.com/cc?ID=te_news_industry,3561&url=_print
. This solder alloy is relatively cheap, has fine grains, and exhibits good solderability. However, due to the high percentage of Sn, it is also prone to tin whiskers and tin pest
| https://www.eptac.com/soldertip/soldertips-dealing-with-the-problems-of-soldering-iron-tips-breaking-down/
quite higher than the melting temperature of the good old 63/37 or 60/40 tin/lead alloy solder. We were wrong. Increasing the solder iron temperature did not help, in fact, it created more problems and tip usage went through the roof
| https://www.eptac.com/faqs/soldertips/soldertip/soldertips-dealing-with-the-problems-of-soldering-iron-tips-breaking-down
quite higher than the melting temperature of the good old 63/37 or 60/40 tin/lead alloy solder. We were wrong. Increasing the solder iron temperature did not help, in fact, it created more problems and tip usage went through the roof
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/resource-center/solder-glossary-of-terms
. Alloy A substance composed of two or more metal elements. Example: Sn96.5 Ag3.0 Cu0.5 is 96.5% Tin, 3.0% Silver, and 0.5% Copper. Generally, alloys will have different properties than those exhibited by their individual elements (e.g
| https://www.eptac.com/faqs/ask-helena-leo/ask/wet-sponge-cleaning-vs-dry-brass-sponge-cleaning
on the solder joint to get the good wetting needed to make an acceptable solder joint. It was also found, that the high tin alloy solders were very corrosive to the metals with which it came into contact