ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/blog/063021-797pcp-2k-progressive-cavity-pump-and-static-mixers-improve-automotive-relay-production
% mixed by the time they left the mixer. The implementation of our 797PCP-2K Y shutoff valve was also critical for this application. It eliminated the dripping and drooling issues caused by the previous process by aligning the mixer in a diagonal versus a vertical position, thus eliminating the dead fluid volume
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Embedded-IR-Heater-User-Guide-22140091.pdf
corner. Figure 12: Camera meter coordinate fields identified in Recipe Manager. Item Name Description 1 Y axis y=0 is the origin point y=60 is the bottom of the image 2 origin point (0,0) is located in upper left corner of camera view. 3 X axis x=0 is the
GPD Global | https://www.gpd-global.com/pdf/doc/Embedded-IR-Heater-User-Guide-22140091.pdf
coordinates (0, 0) of the camera view are located in the upper left corner. Figure 12: Camera meter coordinate fields identified in Recipe Manager. Item Name Description 1 Y axis y=0 is the origin point y=60 is the bottom of the image 2 origin point (0,0) is
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Infrared-Preheat-Module-User-Guide-22140087.pdf
end wrench making any necessary adjustments to overall machine height. c. Repeat the two previous steps for Y-axis by placing one end of level on each conveyor rail. IMPORTANT: Install machine in accordance with applicable standards and regulations, and
Baja Bid | https://bajabid.com/wp-content/uploads/2023/06/XT-V-130-flyer-EN.pdf
• Small footprint and low weight for easy installation 2 Image intensifier (Z-axis) X-ray source Moving the sample closer to the x-ray sources increase the magnification of the resulting image X-ray insight into the inside Tracing hidden defects and internal imperfections With the
GPD Global | https://www.gpd-global.com/pdf/doc/Infrared-Preheat-Module-User-Guide-22140087.pdf
. Repeat the two previous steps for Y-axis by placing one end of level on each conveyor rail. IMPORTANT: Install machine in accordance with applicable standards and regulations, and read all safety instructions. Table 1: Package contents Item Part Number
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/SimpleCoat-Series-Operation-Guide-23100600.pdf
calibration location. It first moves the X and Y axes, and then moves the Z axis. Ensure a clear travel path exists through the work area for both heads. Click Calibrate Head 1. c. Using the X and Y jog buttons, center the tip of the needle over the hole in the
GPD Global | https://www.gpd-global.com/pdf/doc/SimpleCoat-Series-Operation-Guide-23100600.pdf
calibration location. It first moves the X and Y axes, and then moves the Z axis. Ensure a clear travel path exists through the work area for both heads. Click Calibrate Head 1. c. Using the X and Y jog buttons, center the tip of the needle over the hole in the
GPD Global | https://www.gpd-global.com/co_website/pdf/coating/SimpleCoat-Operation-Guide-23100600.pdf
moves the X and Y axes, and then moves the Z axis. Ensure a clear travel path exists through the work area for both heads. Click the applicable button: Calibrate Head 1 or Calibrate Head 2. c. Slide the calibration plate into the work area on the conveyor
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/FLOware-Import-Export-Data-Reference-Guide-22100024R.pdf
, ScaleRecal, UseTempCtl, MatlTemp, NeedleTemp, PreHeatTemp, PostHeatTemp, WorkAreaTemp, and PastMatlLimit. DFLTVAL Add Theta. PECLOC Add TargetZ. Change CleanNdl2X, Y, and Z definition from “camera at the end...” to “camera at the second point...” Add