| http://etasmt.com/te_news_industry/2013-03-23/3361.chtml
. Solder joint dimensions in SMT quickly become much smaller as advances are made toward ultra-fine pitch technology. The reliability of solder joints become more of a concern, as less and less solder is allowed for each joint
| http://etasmt.com/te_news_bulletin/2019-09-28/11162.chtml
. Reflow soldering relies on the action of hot gas flow on the solder joint. The colloidal flux reacts physically under a certain high temperature airflow to achieve SMD soldering
| http://etasmt.com/cc?ID=te_news_bulletin,11162&url=_print
. Reflow soldering relies on the action of hot gas flow on the solder joint. The colloidal flux reacts physically under a certain high temperature airflow to achieve SMD soldering
| http://etasmt.com/te_news_bulletin/2019-09-28/11161.chtml
continuous soldering and the solder joint. Also check the color change of the PCB surface and so on. And adjust the temperature curve according to the inspection results
| http://etasmt.com:9060/te_news_bulletin/2021-08-31/23576.chtml
(non-shiny) solder joints are usually the effect of coarse grain structure in the solid solder joint (though there can be other causes
| http://etasmt.com/te_news_industry/2013-07-03/5361.chtml
order to form a good solder joint, if the solidification range is too wide, there may occur the solder joint cracking, easily cause Electronics damaged. 6, Low toxicity
| http://etasmt.com:9060/te_news_industry/2013-07-03/5361.chtml
order to form a good solder joint, if the solidification range is too wide, there may occur the solder joint cracking, easily cause Electronics damaged. 6, Low toxicity
| http://etasmt.com/te_news_bulletin/2021-08-31/23576.chtml
(non-shiny) solder joints are usually the effect of coarse grain structure in the solid solder joint (though there can be other causes
| http://etasmt.com:9060/te_news_bulletin/2020-08-25/18961.chtml
. The wire is wound, snapped, and dropped on its contact before the welding process, so we can usually see soldering The solder joint is generally a reflow solder joint surrounded by tin-lead solder. 2
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
