| https://www.eptac.com/wp-content/uploads/2021/11/webinar_eptac_10_17_07.pdf
Surface Mount Technology Association (SMTA) | https://www.smta.org/icsr/speaker_forms/Paper-Format-Requirements.doc
. An IPC investigation is currently underway to develop test methods to better predict sulfur based corrosive environments, while silver manufacturers are actively working to improve their ImAg surface finishes
Surface Mount Technology Association (SMTA) | https://www.smta.org/education/presentations/presentations.cfm
. Three surface finishes including OSP, ImAg, and ENIG are considered. The test vehicle consists of 15mm and 6mm Ball Grid Array (BGA) components. The assembled test boards were isothermally aged at 125oC for 12 months, which are then thermally cycled between -40oC to
Surface Mount Technology Association (SMTA) | https://www.smta.org/webinars/
. Three surface finishes including OSP, ImAg, and ENIG are considered. The test vehicle consists of 15mm and 6mm Ball Grid Array (BGA) components. The assembled test boards were isothermally aged at 125oC for 12 months, which are then thermally cycled between -40oC to
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2022/06/Optimizing-Reflowed-Solder-TIM-sTIMs-Processes-for-Emerging-Heterogeneous.pdf
solder ball attach for BGA) on TIMs voiding. Fig. 8 below shows an x-ray result after sTIM reflow, then after subsequent SAC reflow (details later). Fig. 8: Reflow#1 vs. Reflow#2 – same part In the case of Heller Industries, the task was to establish the
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/journal.cfm
., Nathan Blattau, Joelle Arnold, Thomas Johnston, Stephani Gulbrandsen, Julie Silk, Alex Chiu, and Yew-Hoong Chan Abstract 26-4 Is a High Phosphorus Content in the Nickel Layer A Root Cause for Black Pad on ENIG Finishes? Dipl.-Ing. Mustafa Özkök, Joe
| 1 |
