GPD Global | https://www.gpd-global.com/pdf/doc/FLOware-Messages-Reference-Guide-22100026.pdf
FLOware Info and Error Messages Reference Guide Messages Reference Guide Version 1.1 November 28, 2016 Part No. 22100026 for FLOware
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/select/technologies-or-options/board-warp-compensation
based warpage detection systems - Easy setup significantly minimizes operator interface reducing the possibility of human error and shortening programming time - Board warp compensation system requires
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/select/technologies-or-options/board-warp-sensing
- Board warpage sensing system eliminates the need for labor intensive manual adjustment of soldering program - Easy setup significantly minimizes operator interface reducing the possibility of human error
KingFei SMT Tech | https://www.smtspare-parts.com/sale-9504978-v-cut-400mm-pcb-depanelizer-pcb-depaneling-machine-v-groove-pcb-board-aluminum-pcb.html
Features 1, Controlled by microcomputer program, it can cut board accurately with no error. 2, Adjustable blade moving speed: 300mm/s or 500mm/s. As per customers' need, certain speed can be set
KingFei SMT Tech | http://www.smtspare-parts.com/sale-9504978-v-cut-400mm-pcb-depanelizer-pcb-depaneling-machine-v-groove-pcb-board-aluminum-pcb.html
Features 1, Controlled by microcomputer program, it can cut board accurately with no error. 2, Adjustable blade moving speed: 300mm/s or 500mm/s. As per customers' need, certain speed can be set
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Infrared-Preheat-Module-User-Guide-22140087.pdf
). Error message If an error occurs, an error dialog displays with an error code. Refer to Error codes (pg 26). Figure 5: Example of error message with error code. Item Name Item Name D Board ° C 2 ONLINE OFFLINE ERROR/INITIALIZING E Set Point ° C 3 Board
GPD Global | https://www.gpd-global.com/pdf/doc/Infrared-Preheat-Module-User-Guide-22140087.pdf
error dialog displays with an error code. Refer to Error codes (pg 28). Figure 5: Example of error message with error code. Item Name Item Name D Board ° C 2 ONLINE OFFLINE ERROR/INITIALIZING E Set Point ° C 3 Board Request F Underside ° C 4 Passthrough G
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Embedded-IR-Heater-User-Guide-22140091.pdf
board sensors track changing temperatures at appropriate times. If a heater is determined to not be changing temperature when it should be, the heater is disabled and an error is reported. The equipment is tied to the dispense system safety circuitry
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Loader-and-Unloader-User-Guide-24000013M.pdf
= no ejector, 1 = with ejector 4 TimeOut is the maximum amount of time for homing. If homing exceeds this value, the system will report a homing error. 5 The amount of time after a magazine trips the (C) Board Clear Sensor and before the (B) Wheel clamps
GPD Global | https://www.gpd-global.com/pdf/doc/Loader-and-Unloader-User-Guide-24000013M.pdf
= no ejector, 1 = with ejector 4 TimeOut is the maximum amount of time for homing. If homing exceeds this value, the system will report a homing error. 5 The amount of time after a magazine trips the (C) Board Clear Sensor and before the (B) Wheel clamps
