11 hot tear / shrink void results

. Remove the three screws holding the hot air tool together and open the cover. 3. Disconnect and remove the heater pipe. 4. Disconnect the heater connector, pull back the heat shrink tube and desolder thermocouple wires. 5

| https://pcbasupplies.com/wp-content/uploads/2023/06/TMT-HA300-manual-1.pdf

the back of the hot air gun 3. Push forcefully up on the inner tube to unseat the internal heating assembly from the outer shaft. 4. Disconnect the heater connector, pull back the heat shrink tube and desolder thermocouple wires. 5. Insert a new heating

| https://pcbasupplies.com/wp-content/uploads/2023/06/TMT-HA600_User_Manual_English.pdf

, Yoshinori Arayama, Yoshiaki Tsubomatsu, Kiyoshi Hasegawa, Hitachi Chemical Co., Ltd. Root Cause and Solution to Mitigate the Hot Tear Defect Mode in Hybrid SAC-Low Temp Solder Joints Todd Harris, Kevin Byrd, Nilesh Badwe, Intel Corporation Sessions at a

40731 | https://www.smta.org/smtai/SMTAI-2019-Technical-Program.pdf?v=200609010628

Surface Mount Technology Association (SMTA)

40731

, Yoshinori Arayama, Yoshiaki Tsubomatsu, Kiyoshi Hasegawa, Hitachi Chemical Co., Ltd. Root Cause and Solution to Mitigate the Hot Tear Defect Mode in Hybrid SAC-Low Temp Solder Joints Todd Harris, Kevin Byrd, Nilesh Badwe, Intel Corporation Sessions at a

40731 | https://www.smta.org/smtai/SMTAI-2019-Technical-Program.pdf?v=200622100619

Surface Mount Technology Association (SMTA)

40731

Embedded IR Heater User Guide

GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Embedded-IR-Heater-User-Guide-22140091.pdf

. Use for any other purpose may cause damage to the equipment, injury, or death. CAUTION: Hot surface - Do NOT touch. Can cause skin burns upon contact

GPD Global

Embedded Infrared Heater User Guide

GPD Global | https://www.gpd-global.com/pdf/doc/Embedded-IR-Heater-User-Guide-22140091.pdf

. Use for any other purpose may cause damage to the equipment, injury, or death. CAUTION: Hot surface - Do NOT touch. Can cause skin burns upon contact

GPD Global

Infrared Preheat Module User Guide

GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Infrared-Preheat-Module-User-Guide-22140087.pdf

. Use for any other purpose may cause damage to the equipment, injury, or death. CAUTION: Hot surface - Do NOT touch. Can cause skin burns upon contact

GPD Global

Infrared Preheat Module User Guide

GPD Global | https://www.gpd-global.com/pdf/doc/Infrared-Preheat-Module-User-Guide-22140087.pdf

. Use for any other purpose may cause damage to the equipment, injury, or death. CAUTION: Hot surface - Do NOT touch. Can cause skin burns upon contact

GPD Global

Dispense System Service Guide

GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Dispense-System-Service-Guide-22290008G.pdf

) the con- veyor rails protrude and (2) the cutouts in the safety shielding accommodate the conveyor. CE SAFETY CERTIFICATION: DO NOT alter the machine in any way not specified in this document or CE safety certification will be void

GPD Global

Dispense-System-Service-Guide_22290008G.book

GPD Global | https://www.gpd-global.com/pdf/doc/Dispense-System-Service-Guide-22290008G.pdf

shielding accommodate the conveyor. CE SAFETY CERTIFICATION: DO NOT alter the machine in any way not specified in this document or CE safety certification will be void. Equipment is to be used only for its intended purpose. 3/30/22 Dispense System Service

GPD Global