| http://etasmt.com/te_news_bulletin/2020-09-19/19361.chtml
. The flux is active and the chemical cleaning action starts. The water-soluble flux and no-clean flux will have the same cleaning action, but the temperature is slightly different
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/select/technologies-or-options/drop-jet-fluxing
application of flux to target locations without overspray. - Provides true no-clean processing since flux is mitigated by solder nozzle without flux residue or ionic contamination
| https://www.eptac.com/ask/soldering-stranded-wire/
: Once a wire is pre-tinned with lead free – no clean solder, can it then be considered solid wire and then be soldered to a PCBA using water soluble flux
| http://etasmt.com/cc?ID=te_news_bulletin,18961&url=_print
. The water-soluble flux and no-clean flux will have the same cleaning action, but the temperature is slightly different. Remove metal oxides and certain contamination from the metal and solder particles to be bonded. 3
| https://www.eptac.com/soldertip/soldertip-48-the-cleanliness-of-wire-and-terminal-connections/
. Cables are a different animal when cleanliness and cleaning is concern. All documents which I have read, do not recommend the use of water soluble fluxes for the tinning and soldering of wires, cable and connectors and the reasoning being the ability of the flux, through
| https://www.smtfactory.com/PCBA-Cleaning-Machine-PCB-Defluxing-For-Best-Coating-and-Bonding-Effect-id43566387.html
. The cleaning room contains two layers of cleaning baskets, which can clean more boards at one time. Thoroughly and effectively clean organic and inorganic pollutants such as rosin, no-clean flux, water-soluble flux and other organic and inorganic pollutants on the surface of SMT/THT PCBA after soldering
| https://www.eptac.com/faqs/ask-helena-leo/page/4
... Read More Soldering Stranded Wire QUESTION Question: Once a wire is pre-tinned with lead free – no clean solder, can it then be considered solid wire and then be soldered to a PCBA using water soluble flux
Heller 公司 | http://hellerindustries.com.cn/00600-248.pdf
) is compared to the “tent” or “straight ramp” pattern. While the former is suitable for solder pastes that require dwells at specific temperatures, the growth in the use of no-clean pastes demands more controlled high temperature periods lest the flux be depleted. a. b
| http://etasmt.com:9060/te_news_bulletin/2020-08-25/18961.chtml
. The water-soluble flux and no-clean flux will have the same cleaning action, but the temperature is slightly different. Remove metal oxides and certain contamination from the metal and solder particles to be bonded. 3
