Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/06/686047-Win98SE-Software-versions-HC1-controller.pdf
trend plot screen while surfing through channels using Next arrow when pass from belt channel to Heat15 message displays “warning range must exceed alarm range..” - Channel color issue for second flux heater channel (Cool2) is fixed. When channel goes in
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Side-Mount-Loader-Unloader-Guide-24000600.pdf
magazine slot is empty, the lift system moves to the next magazine slot. If all substrates have been ejected, the lift system transports the magazine on the second tray to the programmed position. The operator may exchange the empty magazine with a full one
GPD Global | https://www.gpd-global.com/pdf/doc/Side-Mount-Loader-Unloader-Guide-24000600.pdf
magazine slot is empty, the lift system moves to the next magazine slot. If all substrates have been ejected, the lift system transports the magazine on the second tray to the programmed position. The operator may exchange the empty magazine with a full one
| https://ipcapexexpo.org/exhibitors/event-rules-regulations
& Sponsorships Advertising Opportunities Sponsorship Opportunities For Attendees Home Registration Exhibitor Registration Event Rules & Regulations Please refer to the second page of the exhibit space contract for additional rules and regulations which you accepted at the time of contracting for exhibit space
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Contour-Mapping-Calibration-User-Guide-221MAPDOC-5.pdf
station. At the same time, however, the area to be mapped should not exceed the servo limits. A total of three glass plate clamps (two side clamps and one top clamp) secure the glass plate, preventing it from moving during the mapping process. NOTE
GPD Global | https://www.gpd-global.com/pdf/doc/Contour-Mapping-Calibration-User-Guide-221MAPDOC-5.pdf
station. At the same time, however, the area to be mapped should not exceed the servo limits. A total of three glass plate clamps (two side clamps and one top clamp) secure the glass plate, preventing it from moving during the mapping process. NOTE
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Dispense-System-User-Guide-22100079K.pdf
opera- tor with the use of the video screen and keyboard. Gantry Head Mount Stations Heads Camera 5/18/18 Dispense System User Guide 2.3 GPD Global© Machine Overview: Description Surface Sensor A surface sensor, mounted between the first and second head
Heller 公司 | http://hellerindustries.com.cn/Vacuum-Void-Reduction-Reflow.pdf
, continuous monitoring during thermal cycling. Thermal cycling was done in accordance with the IPC-9701A guideline [22]. The solder joints were monitored using an event detector set at a resistance limit of 1000 ohms. The failure data are reported as
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/Vacuum-Void-Reduction-Reflow.pdf
, continuous monitoring during thermal cycling. Thermal cycling was done in accordance with the IPC-9701A guideline [22]. The solder joints were monitored using an event detector set at a resistance limit of 1000 ohms. The failure data are reported as
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2022/04/Vacuum-Void-Reduction-Reflow-1.pdf
, continuous monitoring during thermal cycling. Thermal cycling was done in accordance with the IPC-9701A guideline [22]. The solder joints were monitored using an event detector set at a resistance limit of 1000 ohms. The failure data are reported as
