ORION Industries | http://orionindustries.com/pdfs/300lse.pdf
. Humidity Resistance: High humidity has minimal effect on adhesive performance. No significant reduction in bond strength is observed after exposure for 7 days at 90°F (32°C) and 90% relative humidity. U.V. Resistance
| https://www.eptac.com/faqs/ask-helena-leo/ask/shelf-life-of-soldered-components
: There has been some request by our customers asking how long products can be stored before solderability becomes a concern. Assuming the following storing conditions, Humidity-10-70% Temperature 12-30C
| https://www.eptac.com/faqs/ask-helena-leo/ask/ceramic-ccas-and-aqueous-wash-and-bake-out-prior-to-parylene-coating
. As for drying the material, this would depend upon the length of time that is taken from the bake cycle to the conformal coating cycle and what the relative humidity is in the particular area of the facility
GPD Global | https://www.gpd-global.com/co_website/pdf/dispense/Catalina-Benchtop-Dispense-System.pdf
) ─ Range of Operation X, Y, Z Axes 400 x 400 x 150 mm 200 x 200 x 50 mm R-Axis (rotation) ─ ±360° ─ Payload X-Axis (workpiece) 14 kg (30.9 lbs) 7 kg (15.4 lbs) Y-Axis (pump) 5 kg (11.0 lbs) 3.5 kg (7.7 lbs) Speed, maximum Point to Point X
GPD Global | https://www.gpd-global.com/pdf/dispense/Catalina-Benchtop-Dispense-System.pdf
) ─ Range of Operation X, Y, Z Axes 400 x 400 x 150 mm 200 x 200 x 50 mm R-Axis (rotation) ─ ±360° ─ Payload X-Axis (workpiece) 14 kg (30.9 lbs) 7 kg (15.4 lbs) Y-Axis (pump) 5 kg (11.0 lbs) 3.5 kg (7.7 lbs) Speed, maximum Point to Point X
GPD Global | https://www.gpd-global.com/pdf/dispense/Catalina-Benchtop-Dispense-System.pdf?utm_source=emailnewsletter
) ─ Range of Operation X, Y, Z Axes 400 x 400 x 150 mm 200 x 200 x 50 mm R-Axis (rotation) ─ ±360° ─ Payload X-Axis (workpiece) 14 kg (30.9 lbs) 7 kg (15.4 lbs) Y-Axis (pump) 5 kg (11.0 lbs) 3.5 kg (7.7 lbs) Speed, maximum Point to Point X
Baja Bid | https://bajabid.com/wp-content/uploads/2021/05/MY300-SX-Brochure.pdf
. (5) According to IPC 9850 Cpk 1.33 = 4σ + o£set. (6) Small chip settings, recommended for 0201 (0.6 x 0.3 mm) and below. BOARD HANDLING INLINE CONVEYOR T460 T640 Maximum board size 460 x 510 mm (18” x 20”) 640 x 510 mm (25” x 20
ORION Industries | http://orionindustries.com/pdfs/nomex410.pdf
. Unless otherwise noted, all properties were measured in air under “standard” conditions (in equilibrium at 23°C, 50% relative humidity). Note that, like other products of papermaking technology, NOMEX
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/our-company/about-us/corporate-headquarters
Forest Stewardship Council (FSC) Demand Control Ventilation Ventilation systems are designed for maximum occupancy. When the building is not fully occupied it will bring in more outside air then necessary unless CO2 sensors are installed
GPD Global | https://www.gpd-global.com/co_website/benchtop-dispense-robot.php
) ─ Range of Operation X, Y, Z Axes 400 x 400 x 150 mm 400 x 400 x 150 mm 200 x 200 x 50 mm R-Axis (rotation ) ─ ±360° ─ Payload X-Axis (workpiece) 14 kg (30.9 lbs) 14 kg (30.9 lbs) (15.4 lbs) Y-Axis (pump) 5 kg (11.0 lbs) 5 kg (11.0 lbs) 3.5 kg (7.7 lbs) Speed, maximum POINT TO POINT X
.gif)
winsouce.jpg)
