ORION Industries | http://orionindustries.com/pdfs/PDS_GPVOS_0305E.pdf
• Electrically isolating Gap Pad VO Soft is recommended for applications that require a minimum amount of pressure on components. Gap Pad VO Soft is a highly conformable, low-modulus, filled-silicone polymer on a rubber-coated fiberglass
ORION Industries | http://orionindustries.com/pdfs/PDS_GPVOUS_0305E.pdf
• Thermal conductivity: 1.0 W/m-K • Highly conformable, low hardness • “Gel-like” modulus • Designed for low-stress applications • Puncture, shear and tear resistant Gap Pad VO Ultra Soft is recommended for applications that require a minimum amount of pressure on
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/dage/test-types-2020/flexural-test
, particularly composites and polymers. Flexural testing is used to determine the elastic modulus and failure strain of laminates. The manufacturing process for laminates involves a number of steps that impact the mechanical properties of the final board
ORION Industries | http://orionindustries.com/pdfs/lexan9600.pdf
% 85 MECHANICAL Tensile Strength ASTM D638 psi @ Yield 9,500 Ultimate 9,000 Elongation ASTM D638 % 95 Tensile Modulus ASTM D638 psi 235,000 Flexural Strength ASTM D790 psi 13,500 Flexural Modulus ASTM D790 psi 370,000 Compressive Strength ASTM D695 psi 12,500 Dynatup Impact Strength, 1/2" dia. dart, (gauge dependant)***, @ 73
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/dage/test-types-2020/ribbon-peel
. The force measured often depends on substrate properties (dimensions, elastic modulus and plasticity) and in the case of an adhesive, adhesive thickness
ORION Industries | http://orionindustries.com/gap-pad.php
. Gap pad is a highly conformable, low modulus polymer, which is available in a range of thicknesses from 0.020" to 0.160". Gap Pad is also available with or without adhesive
| https://www.eptac.com/ask/gullwing-lead-deformation/
. Secondly, reforming the leads beyond their modulus of elasticity will impact the grain structure of the basis metal, weakening or work hardening, which could cause catastrophic failures in the field
| https://www.eptac.com/faqs/ask-helena-leo/ask/gullwing-lead-deformation
. Secondly, reforming the leads beyond their modulus of elasticity will impact the grain structure of the basis metal, weakening or work hardening, which could cause catastrophic failures in the field
ORION Industries | http://orionindustries.com/pdfs/fr700.pdf
@ Yield 9,500 Ultimate 8,800 Tensile Modulus ASTM D882 psi 310,000 Elongation ASTM D882 % 25–50 Tear Strength Initiation ASTM D1004 g/mil 770
ORION Industries | http://orionindustries.com/pdfs/lexanfr60.pdf
% 0.28 MECHANICAL Tensile Strength ASTM D882 psi @ Yield 10,000 Ultimate 8,800 Tensile Modulus ASTM D882 psi 320,000 Elongation ASTM D882 % 25
