: I see so many places say that they build to IPC-A-610, yet I thought you build to J-STD-001, and inspect to IPC-A-610. Is this correct? Read Answer Shelf Life of Soldered Components Question
Surface Mount Technology Association (SMTA) | https://www.smta.org/education/presentations/presentations.cfm
. Three surface finishes including OSP, ImAg, and ENIG are considered. The test vehicle consists of 15mm and 6mm Ball Grid Array (BGA) components. The assembled test boards were isothermally aged at 125oC for 12 months, which are then thermally cycled between -40oC to
Surface Mount Technology Association (SMTA) | https://www.smta.org/webinars/
. Three surface finishes including OSP, ImAg, and ENIG are considered. The test vehicle consists of 15mm and 6mm Ball Grid Array (BGA) components. The assembled test boards were isothermally aged at 125oC for 12 months, which are then thermally cycled between -40oC to
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/journal.cfm
: Whisker Inspection Results André M. Delhaise, Stephan Meschter, Polina Snugovsky, Jeff Kennedy, Zohreh Bagheri Abstract 32-2 Warpage of Flexible-Board Assemblies with BGAs During Reflow and Post-Assembly Usage Pradeep Lall, Kartik
1 |